26 electrolux what to do if...
What to do if...
Certain problems are due to lack of simple maintenance or oversights, which can be solved easily without calling out an engineer. Before contacting your local Service Centre, please carry out the checks listed below.
During machine operation it is possible that the red light of button 8 blinks, at the same time some acoustic signals sound and one of the following alarm codes appears on the display to indicate that the machine is not working:
●E10: problem with the water supply
●E20: problem with water draining
●E40: door open.
Once the problem has been eliminated, press button 8 to restart the programme. If after all checks, the problem persists, contact your local Service Centre.
Malfunction |
| Possible cause | |
|
|
|
|
|
|
|
|
The washing machine |
| ● The door has not been | |
does not start: |
| closed. E40. |
|
|
| ● The plug is not properly |
|
|
| inserted in the power |
|
|
| socket. |
|
|
| ● There is no power at the |
|
|
| socket. |
|
|
| ● The main fuse or the |
|
|
| fuse in the plug has |
|
|
| blown. |
|
|
| ● The selector dial is not |
|
|
| correctly positioned and |
|
|
| button 8 has not been |
|
|
| pressed. |
|
|
| ● The delay start has been |
|
|
| selected. |
|
|
| ● The Child Safety Lock |
|
|
| has been activated. |
|
|
|
| |
The machine does not |
| ● The water tap is closed. |
|
fill: |
| E10 |
|
|
| ● The inlet hose is |
|
|
| squashed or kinked. E10 |
|
|
| ● The filter in the inlet hose |
|
|
| is blocked. E10 |
|
|
| ● The door is not properly |
|
|
| closed. E40 |
|
|
|
|
|
Solution
●Close the door firmly.
●Insert the plug into the power socket.
●Please check your domestic electrical installation.
●Replace the fuse.
●Please turn the selector dial and press button 8 again.
●If the laundry are to be washed immediately, cancel the delay start.
●Deactivate the Child Safety Lock.
●Open the water tap.
●Check the inlet hose connection.
●Clean the water inlet hose filter.
●Close the door firmly.
