•Depress «Start/Pause» button again to start immediately the programme.
The Delay cannot be selected with Drain 
programme.
Display
The display shows the following information:
Duration of the selected programme
After selecting a programme, the duration is displayed in hours and minutes (for example 2.05).
The duration is calculated automatically on the basis of the maximum recommended load for each type of fabric.
2.05
After the programme has started, the time remaining is updated every minute.
Washing programme phase icons
By selecting the wash programme, the washing programme phase icons corresponding to the various phases making up the programme are shown in the bottom of the display.
2.05 | 2.05 |
|
After you have pressed the «Start/Pause» button and the machine
has started, the 
(Door locked) pilot light is on and only the phase running icon stays on.
use electrolux 13
When the programme has finished, three flashing zero «0.00».
Delay
The selected delay (20 hours max) set by means of the relevant button appears on the display for about 3 seconds, then the duration of the previously selected programme is displayed.
The delay time value decreases by one unit every hour and then, when 1 hour remains, the time decreases every minute.
Incorrect option selection
If an option which is not compatible with the set wash programme is selected, the message Err is displayed for few seconds and the integrated red «Start/Pause» light start flashing.
Alarm codes
In the event of operating problems, some alarm codes can be displayed, for example E20 (see paragraph “Something not working”).
