34 electrolux | installation |
P0256 |
|
7.Plug the open holes with the plugs supplied with the instruction booklet.
P0020 |
Positioning |
Install the machine on a flat hard floor. Make sure that air circulation around the machine is not impeded by carpets, rugs etc.
Check that the machine does not touch the wall or other kitchen units. Level the washing machine by raising or lowering the feet. The feet may be tight to adjust as they incorporate a self locking nut, but the machine MUST be level and stable.
P1051 |
Any necessary adjustment can be made with a spanner. Accurate levelling prevents vibration, noise and displacement of the machine during operation. Never place cardboard, wood or similar materials under the machine to compensate for any unevenness in the floor.
Water inlet
Do not use the hose from your previous machine to connect to the water supply!
1.Connect the hose to a tap with a 3/4” thread.
P1088 |
2.Set the hose correctly by loosening the ring nut. After positioning the inlet hose, be sure to tighten the ring nut again to prevent leaks.
P0021 |
Always use the hose supplied with the appliance. The inlet hose must not be lengthened.
