Appendix a FAQ, When shall I use DMZ?

Appendix A: FAQ

1.The power indicator of Netac AirTrack T610 Wireless Broadband Router not bright, why?

Answer: Please check the items as follows:

A.Make sure the power adapter is original-packaged.

B.Make sure your Netac AirTrack T610 Wireless Broadband Router connected to power properly.

C.Make sure your Netac AirTrack T610 Wireless Broadband Router is powered on.

2.The LAN indicator of Netac AirTrack T610 Wireless Broadband Router not bright, why?

Answer: Please check the items as follows:

A.Make sure the computer, hub, switchboard or ADSL Modem/Cable Modem is connected to Netac AirTrack T610 Wireless Broadband Router properly.

B.Make sure the Network Interface Card installing properly. Please refer to "2.2 Configure TCP/IP" for details.

3.I cannot log on the configuration page of Netac AirTrack T610 Wireless Broadband Router, why?

Answer: Please refer to "2.3 Check Configuration" for details.

4.Why I cannot access Internet through Netac AirTrack T610 Wireless Broadband Router?

Answer: Please refer to "2.3 Check Configuration" for details.

5.How many IP addresses Netac AirTrack T610 Wireless Broadband Router can support?

Answer: Can support at most 253 IP address, range: 192.168.1.2～192.168.1.254.

Answer: When Internet users need unlimited communication with LAN host, it need use DMZ. Such as: play network game or hold Net meeting.

Answer: Please E-mail to support@netac.com, Netac customer service engineer will reply you in time.