40 electrolux installation
Installation
Unpacking
All transit bolts and packing must be removed before using the appliance.
You are advised to keep all transit devices so that they can be refitted if the machine ever has to be transported again.
1.After removing all the packaging, carefully lay machine on it’s back to remove the polystyrene base from the bottom.
HEC0008 |
2.Remove the power supply cable and the draining hose from the hose holders on the rear of the appliance.
HEC0001
3.With a suitable spanner unscrew and remove the central rear bolt A.
A |
HEC00022 |
4.Unscrew and remove the two large rear bolts B and the six smaller bolts
C.
|
| C |
|
| B |
HEC0003S | C | B |
5.Remove the bracket D and refit the six smaller bolts C and slide out the relevant plastic spacer E.
D |
HEC0011S |
E |
C |
HEC0023 C |
