Use
First Use
●Ensure that the electrical and water connections comply with the installation instructions.
●Remove the polystryrene block and any material from the drum.
●Run a cotton cycle at 95°C, without any laundry in the machine, to remove any manufacturing residue from the drum and tub.
Setting the language
When switching on the appliance for the first time, by turning the programme selector dial, you must set the language in which you want the indicators in the display to appear. When the appliance is switched on again all indicators in the display will appear in this language.
Important!
If the display is not showing any language, the appliance has already been switched on once. In such case, if you would change the language setting, press at the same time Temp. and Spin buttons for 6 seconds to activate the menu language.
By pressing the 
Option buttons you can scroll all the available languages. Press the Ok button twice to confirm your choice.
Setting the time
After having chosen the language you must set the time prior to the first wash and when changing to and from daylight savings time.
The clock setting permits you to modify/set up the current time. It is important to keep it updated as the current END Cycle Time depends on it.
use electrolux 9
With a short/single time pressure of the
Option 
buttons, the time varies minute by minute. With a continue pressure of the same buttons, the time varies 10 minutes by 10 minutes.
Press the Ok button to fix the current time.
Daily Use
Customize your appliance
This appliance is provided of a «settings» menu that allows you to modify the factory settings as you want.
When you switch on the machine, by turning the programme selector dial,
press the Option 
buttons to activate the Options menu. By pressing again the same buttons you can move through all the available options till when you locate the Settings menu. Press Ok to access in the menu. Use again
Option 
buttons to scroll all the settings and press Ok button to confirm your choice.
Setting the sound volume
The sound setting permits you to modify the volume of the sound emitter. By
pressing the Option 
buttons, you can choose between different volume levels from 0 to 9 (0 = no sound;
9= max.).
Press Ok button to confirm your choice.
Setting the brightness
The Brightness setting allows you to modify the backlight intensity of the display.
By pressing the Option 
buttons, you can increase or decrease the brightness.
