• Remove the power supply cable and the
draining and inlet hose from the hose
holders (C) on the rear of the appliance.
• Unscrew the three bolts (A) and remove
the hose holders (C).
• Slide out the relevant plastic spacers (B).
Warning! Do not remove the drain
hose from the rear support.
Remove this hose only if it is
necessary to drain the water. Refer
to "Frost precaution" and "What to
do if".
• Plug the smaller upper hole and the two
large ones with the corresponding plastic
plug caps.
POSITIONING AND LEVELLING
Level the appliance by raising or lowering
the feet. Depending on the model, the ap-
pliance can have four adjustable feet, or
two front-adjustable feet and two back
fixed feet.
The appliance MUST be level and stable on
a flat hard floor. If necessary, check the set-
ting with a spirit level. Any necessary ad-
justment can be made with a spanner.
electrolux 7