16electrolux
3Spin reduction and By selecting a programme, the appliance proposes auto-
Rinse Hold | matically the maximum spin speed provided for that pro- |
| gramme. |
| Press this button repeatedly to change the spin speed, if |
| you want your laundry to be spun at a different speed. |
| The relevant light illuminates. |
Rinse Hold
By selecting this function the water of the last rinse is not emptied out to prevent the fabrics from creasing. Before opening the door it will be necessary to empty out the water.
To empty out the water, please read the paragraph «At the end of the programme».
4 | Super Quick | By pressing this button the corresponding pilot light illu- |
|
| minates. |
|
| Short cycle for lightly soiled items or for laundry which |
|
| needs only freshening up. |
|
| With this option, a reduced load of laundry is recommen- |
|
| ded: |
•Cottons 3 kg
•Synthetics and delicates 1,5 kg
3Extra Rinse
+
4
This appliance is designed for saving water. However, for people with very delicate skin (allergic to detergents) it may be necessary to rinse the laundry using an extra quantity of water.
Press simultaneously the buttons 3 and 4 for some sec- onds: the pilot light 7.2 comes on. This function stays permanently on. To remove it press the same buttons again until the pilot light 7.2 goes off.
5 | Delay Start | The start of the programme can be delayed by 3, 6 or 9 |
|
| hours by means of this button. The relevant light illumi- |
|
| nates. |
|
| You must select this option after you have set the pro- |
|
| gramme and before you start the programme. |
Select a delayed start:
•select the programme and the required options;
•select the delay start by pressing the button 5;
•press the button 6:
–the appliance starts its hourly countdown.
–The programme will start after the selected delay has expired.
Cancelling the delayed start after having started the programme:
•set the appliance to PAUSE by pressing the button 6;
•press the button 5 once, the light relevant to the selec- ted delay goes off;
•press the button 6 again to start the programme.
The DELAY START cannot be selected with the drain programme.
