Electrolux FAVORIT 40260 i manual Water drain

Installation and Connection Instructions

Water drain

Drain hose

1 The drain hose must not be kinked, crushed or entangled.

•Connecting the drain hose:

–Maximum permitted height: 1 metre.

–Minimum required height 40 cm above the lower edge of the machine.

Extension hoses

• Extension hoses are available from

AEG Service Force. The internal diameter of the extension hoses

must be 19 mm to ensure that the function of the appliance is not impeded.

• Hoses may be laid a maximum of

3 metres horizontally; the maximum permitted height for the connection

for the drain hose is then 85 cm.

Sink outlet connection

•The outlet of the drain hose (ø 19 mm) fits all commonly available sink outlet spigot types. The outer diameter of the spigot connection must be at least 15 mm.

•The drain hose must be fixed to the sink outlet connection using the hose clamp supplied.

If the dishwasher is fitted at a high position

If the dishwasher is installed at a high level, and the drainhose connec- tion is less than 30 cm from the bottom of the appliance, adapter kit ET 111099520 must be fitted. This is available from Customer Service.

Discharging into a standpipe

When discharging into a standpipe, the upright standpipe should have a minimum, length of 30 cm (12“) from the bottom of the elbow to the top of the pipe (see diagram). Make sure that it is designed in such a way that the end of the drain hose cannot be covered with water.

33