Electrolux FAVORIT 40310 manual Installing the Dishwasher, Built-Under Dishwasher

Installation and Connection Instructions

INSTALLATION AND CONNECTION INSTRUCTIONS

Installing the Dishwasher

•The dishwasher must be installed on a firm floor and adjusted such that it is stable and level.

• To compensate for unevenness in the floor and to match the height of the appliance to that of surrounding units extend the threaded feet by unscrew- ing:

– use a screwdriver.

• For built-in dishwashers the rear feet should be adjusted from the front of the appliance using a screwdriver.

• The drain hose, inlet hose and mains cable must be laid such that

	they are free to move in the rear of the plinth recess, so that they
	cannot be kinked or crushed.
	Built-Under Dishwasher
	(see enclosed installation instructions)
	Free-Standing Appliances
	can be set up as stand-alone without additional installation.
1	If the dishwasher is set up next to a gas or coal cooker, a heat-
	insulating, non-flammable plate must be mounted between the

dishwasher and the cooker, flush to the top edge of the work surface (depth 57.5 cm). The plate should have aluminium foil on the side fac- ing the cooker.

30