Setting the TV system
If the picture of the disc being played is distorted, switch the TV system to the one used in your country or region.
When the TV system is switched, the types of discs that can be played are limited.
The factory default setting is AUTO.
1 Turn the player’s power off.
Press STANDBY/ON.
2 Press STANDBY/ON while pressing .
Use the buttons on the player’s front panel.
The power turns on and the TV system switches as shown below.
AUTONTSC
NTSCPAL
PALAUTO
Types of | Format | Player setting |
| ||
discs/files | NTSC | PAL | AUTO | ||
| |||||
| NTSC | NTSC | PAL | NTSC | |
| PAL | NTSC | PAL | PAL | |
| — | NTSC | PAL | NTSC or PAL | |
no disc |
|
|
|
| |
Cautions on use
When moving the player
When moving the player, check first that there is no disc loaded and that the disc tray is closed. Then press
STANDBY/ON on the player (or STANDBY/ON on the remote control), wait for the OFF indicator on the front panel display to turn off, then unplug the power cord. Moving the player with a disc inside it could result in damage.
Place of installation
Choose a stable place near the TV or stereo system being used with the player.
Do not place the player on top of a TV or color moni- tor. Also install it away from cassette decks and other devices easily affected by magnetic forces.
Avoid the following types of places:
Places exposed to direct sunlight
Humid or poorly ventilated places
Extremely hot places
Places exposed to vibrations
Places in which there is much dust or cigarette smoke
Places exposed to soot, steam or heat (kitchens, etc.)
Do not place objects on the player.
Do not place any objects on top of the player.
Do not obstruct the ventilation holes.
Do not use the player on shaggy rugs, beds, sofas, etc., or wrapped in cloth, etc. Doing so will prevent the heat from dispersing, leading to damage.
Do not expose to heat.
Do not place the player on top of an amplifier or other component that generates heat. When placing it in a rack, to avoid the heat given off by the amplifier or other audio component, place it on a shelf below the amplifier.
Turn off the player’s power when not using it.
Depending on signal conditions, striped patterns may appear on a TV screen and noise may enter the sound of radio broadcasts when the player’s power is on. If this happens, turn the player’s power off.
English
En 23
