Manuals / Polycom / Computer Equipment / Network Router

Polycom 6000 Screw the outdoor enclosure lid back onto the enclosure, Installing on an I-Beam

Models: 6000

1 12

Page 9

Installing on an I-Beam

7.Place the Base Station into the enclosure with the side of the Base Station with the mounting hole facing the I-beam. The Base Station should fit tightly between the foam blocks.

8.Screw the outdoor enclosure lid back onto the enclosure.

1725-36127-001-F.doc

Page 9

Image 9

Polycom 6000 manual Screw the outdoor enclosure lid back onto the enclosure, Installing on an I-Beam, 1725-36127-001-F.doc

Contents

Installing the Outdoor Base Station SpectraLink 6000 SystemJuly 2008 Edition 1725-36127-001 Version F Patent Information Trademark InformationCopyright Notice Contact InformationSpectraLink 6100 MCU Installation and Operation About this GuideSpectraLink 6300 MCU Installation Polycom Corporation Model NumbersInstalling the Outdoor Base Station For Return Material Authorization rmacoordinator@polycom.comFor Technical Support technicalsupport@polycom.com 1725-36127-001-F.docInstalling on an I-Beam ContentsInstalling on a Light Pole or Electrical Pole Installing Flush Against a Wall or Hard CeilingInstalling Flush Against a Wall or Hard Ceiling Installing Flush Against a Wall or Hard Ceiling 5. Plug the RJ45 into the RJ48C connectorMounting hole RJ48C connector 7. Screw the outdoor enclosure lid back onto the enclosureInstalling on an I-Beam Installing on an I-Beam 8. Screw the outdoor enclosure lid back onto the enclosure1725-36127-001-F.doc “Caddy” or “B-Line” 3/8” beam clamps Installing on a Light Pole or Electrical PoleInstalling on a Light Pole or an Electrical Pole 8. Screw the outdoor enclosure lid back onto the enclosure1725-36127-001-F.doc PN 1725-36127-001-F.doc