Manuals / Polycom / Computer Equipment / Network Router

Polycom 6000 manual Screw the outdoor enclosure lid back onto the enclosure, 1725-36127-001-F.doc

Models: 6000

1 12

Page 11

Installing on a Light Pole or an Electrical Pole

7.Place the Base Station into the enclosure with the side of the Base Station with the mounting hole facing the pole. The Base Station should fit tightly between the foam blocks.

8.Screw the outdoor enclosure lid back onto the enclosure.

1725-36127-001-F.doc

Page 11

Image 11

Polycom 6000 Screw the outdoor enclosure lid back onto the enclosure, Installing on a Light Pole or an Electrical Pole

Contents

July 2008 Edition 1725-36127-001 Version F Installing the Outdoor Base StationSpectraLink 6000 System Contact Information Trademark InformationPatent Information Copyright NoticePolycom Corporation Model Numbers About this GuideSpectraLink 6100 MCU Installation and Operation SpectraLink 6300 MCU Installation1725-36127-001-F.doc For Return Material Authorization rmacoordinator@polycom.comInstalling the Outdoor Base Station For Technical Support technicalsupport@polycom.comInstalling Flush Against a Wall or Hard Ceiling ContentsInstalling on an I-Beam Installing on a Light Pole or Electrical PoleInstalling Flush Against a Wall or Hard Ceiling 7. Screw the outdoor enclosure lid back onto the enclosure 5. Plug the RJ45 into the RJ48C connectorInstalling Flush Against a Wall or Hard Ceiling Mounting hole RJ48C connectorInstalling on an I-Beam 1725-36127-001-F.doc Installing on an I-Beam8. Screw the outdoor enclosure lid back onto the enclosure “Caddy” or “B-Line” 3/8” beam clamps Installing on a Light Pole or Electrical Pole1725-36127-001-F.doc Installing on a Light Pole or an Electrical Pole8. Screw the outdoor enclosure lid back onto the enclosure PN 1725-36127-001-F.doc