The rinse-aid
The
Filling up the rinse-aid
1.Open the container by turning the lid (A) anticlockwise.
2.Add the rinse aid until the container is completely full. The indicator (B) will be completely dark.
3.Top up the rinse aid when the rinse aid indicator light on the control panel illuminates.
BR01 |
BR03 |
12
Ensure that the lid is closed after every refill.
Clean up any rinse aid spilt during filling with an absorbent cloth to avoid excess foaming during the next wash.
Attention! Do not put liquid detergent in the rinse aid compartment.
If rinse aid refilling is necessary, the rinse aid indicator light will illuminate only in setting mode and at the end of the washing programme.
During the run of the programme it will remain off.
It is possible to deactivate the rinse aid indicator light (see the following instructions).
By default the rinse aid indicator light is active.