Electrolux G 9 88 50-4i installation instructions Positioning, Your Appliance Needs Air

Models: G 9 88 50-4i

1 20
Download 20 pages 15.66 Kb
Page 18
Image 18
Positioning

Positioning

This appliance should only be installed at a location where the ambient temperature corresponds to the climate classification indicated on the rat- ing plate, which is located on the inside left of the appliance.

The following table shows which ambient temperature is correct for each climate classification.

Climate classification

 

for an ambient temperature of

 

 

 

 

 

 

SN

 

+10 to +32 °C

 

 

 

N

 

+16 to +32 °C

 

 

 

The appliance should be located in a dry atmosphere, out of direct sunlight and away from continuous heat and extreme temperature, e.g. not next to a boiler or radiator, or in a very cold room e.g. an outhouse. If these tem- peratures are exceeded i.e. warmer or colder, then the appliance may not operate correctly. For building-in and door reversal instructions please refer to the relevant instructions.

"Installation directly under a hob is not allowed. The temperatures of the hob, which in part are quite high, may damage the appliance.

If a hob is installed near the appliance, the corresponding installation and safety instructions must be adhered to. Considering the numerous installa- tion conditions which are possible, there is no way of providing detailed information here.

It is necessary to avoid overheating of the refrigerator by maintaining ade- quate distances from heat sources and by the use of a suitable thermal insu- lation plate. Proper ventilation of the appliance must also be ensured."

Your Appliance Needs Air

For safety reasons, minimum ventilation must be as shown Fig.

Attention: keep ventilation openings clear of obstruction;

50

 

556

542

880

 

560 min.

 

873

 

18

Page 18
Image 18
Electrolux G 9 88 50-4i installation instructions Positioning, Your Appliance Needs Air