Technical Terminology
•Refrigerant
Liquids that can be used to a generate a cooling effect are known as refrigerants. They have a relatively low
•Refrigerant Circuit
Closed circulation system that contains the refrigerant. The refri- gerant circuit comprises primarily of an evaporator, a compressor, a condenser and pipe work.
•Evaporator
The refrigerant is evaporated in the evaporator. Similar to all other liquids, refrigerant requires heat to evaporate. This heat is removed from the interior of the appliance, as a result the interior is cooled.
The evaporator is therefore located inside the appliance or placed in foam immediately behind the inner wall and thus not visible.
•Compressor
The compressor looks like a small drum. It is driven by a
•Condenser
The condenser normally has the form of a grid. The refrigerant com- pressed in the compressor is liquefied in the condenser. During this process, heat is released to the surrounding air at the surface of the condenser. The condenser is mounted on the base of the appliance.
Regulations, Standards, Guidelines
This appliance was designed for household use and was manufactured in accordance with the appropriate standards. The necessary measures in accordance with appliance safety legislation regulations (GSG), acci- dent prevention regulations for refrigeration appliances (VBG 20) and the regulations of the German Society of Electrical Engineers (VDE) were observed in the manufacture of this appliance.
The refrigerant circuit has been checked for leaks.
;This appliance is in accordance with the following EU guidelines:
–73/23/EWG dated 19 February 1973 - low voltage guidelines.
–89/336/EWG dated 3 May 1989
(including guideline change notice 92/31/EWG) - EMV guideline
818 16 | 41 |
