![Something not Working](/images/new-backgrounds/181794/18179479x1.webp)
Something not Working
Sympton | Solution | |
| If the door seal is not airtight (probably | |
| after reversing the door) | |
| apply warm air to the non sealing area | |
Excessive build up of frost. | using a hair dryer set to a gentle heat. (do | |
| not use a fan heater for this purpose). | |
| This will make the rubber more supple | |
| and allow it to revert to its original shape. | |
Noise | Refer to Normal Operating Sounds | |
The compressor does not start immedia- | This is normal, the compressor starts after | |
tely after changing the temperature set- | ||
a period of time. | ||
ting. | ||
| ||
|
|
If after the above checks there is still a fault, call your local AEG Service Force Centre.
Please note that proof of purchase is required for
40 | 818 16 |