Run wash cycle
•SOAKING
3 After soaking separately, the water must be pumped out first and then the main wash cycle can be set as desired:
0Release the SOAKING button, or
rotate the program selector clockwise to PUMP OUT (water is pumped out).
0Subsequently set the main wash cycle as desired.
After Rinse Hold:
After a Rinse Hold the water must be pumped out first or the washing spun:
0Release RINSE HOLD button.
0Rotate the program selector clockwise to SPIN or SHORT SPIN (washing becomes spun according to the program group selected and the final spin speed set),
or
rotate program selector clockwise to PUMP OUT (water is pumped out).
After the program is completed:
0Open the door.
0Remove the washing.
0Push in the program selector.
The indicator ON light is extinguished. Washing machine is off.
0After the program has finished, pull the detergent drawer out a little so that it can dry. Leave the door ajar for a while. This helps to prevent stagnant smells and helps to preserve the door seal.
0Close the water tap.
0We recommend you unplug the appliance and turn off the water supply when the wash program has finished.
22
