Electrolux LAVAMAT 62800 specs

Switching on the appliance/selecting a programme

Set the programme and tempera- ture using the programme knob.

3 By selecting a programme, you switch the appliance on at the same time.

– The programme progress display indicates the programme steps that the selected programme will perform.

–In the multi-display the

estimated length of the programme (in minutes) appears.

Changing the spin speed/selecting rinse hold

The washing machine suggests the maximum permitted speed that is suitable for the selected pro- gramme. You can reduce this speed: Press the SPIN/RINSE HOLD button repeatedly until the desired display lights up.

3The speed for the final spin can still

be altered during the programme. To do this:

1.Press the START/PAUSE button.

2.Change the speed.

3.Press the START/PAUSE button again.

RINSE HOLD

With RINSE HOLD the washing is left to soak in the final rinse water. There is no final spin after the intermediate spin(s). Intermediate spins are programme-dependent and cannot be altered.

13

Image 13

Electrolux LAVAMAT 62800 Switching on the appliance/selecting a programme, Changing the spin speed/selecting rinse hold

Contents

Lavamat Dear customer Following symbols are used in the text Contents Installation and connection instructions Prior to using for the first time SafetySafety of Children and Infirm Persons Follow the Instructions for installation and connection This could constitute a fire hazard through overheating General safety Control panel Description of the appliance Refresh Programme overview Application/features Preparing and sorting washing Before the first washPreparing washing Sorting washing Opening the door/loading washing Running a washing cycleAdding detergent/additives For USA and Canada only If you use liquid detergents Washing powder/tablets for the main wash Changing the spin speed/selecting rinse hold Switching on the appliance/selecting a programme RINSE+ Selecting the programme options Starting a programme Setting the delay timerProgramme progress End of the wash cycle/removing the washing Interrupting a programme/adding washingInterrupting a programme Adding washing Cleaning and maintenance Child safety deviceCleaning procedure Releasing the child safety device Washing drum Detergent dispenser drawerDoor and rubber collar Remedying small malfunctions What to do if Been removed Washing is grey and scale is being deposited in the drum If the wash results are not satisfactoryThere are grey stains on the washing After the last rinse foam can still be seen Carrying out an emergency drain When the water has all drained away Drain pump Packaging material DisposalOld appliance Consumption values Technical data Installing the appliance Safety information for the installationTransporting the appliance Unpacking When moving using a sack trolleyPage Where to install Electrical connection Connecting to the water supplyMaking the appliance level Permitted water pressure Water inlet Pumping heights over 1 m Water drainageDraining water into a wash basin/bath European Guarantee Guarantee/Customer Service Lietuva +370 5 Verkių 29, LT09108 Vilnius Luxembourg +35 Service 132 976 Subject to change without notice