Setup menus
<Menu management accompanying switching the system frequency>The system menu and setup menu have some items whose settings differ and other items with which no selection options are displayed and whose settings are fixed (indicated by the shading in the table below), depending on the switching of the operation mode in response to the setting selected for system menu item No.25 (SYSTEM FREQ). (Refer to the table below.)
System menu and setup menu settings
•Each of the items whose settings differ is saved in the VTR MEMORY (current file and one of the backup files 1 to 4). The settings that correspond to each operation mode will be displayed so that the settings can be performed for each operation mode.
Registration of the <PF1> and <PF2> function buttons
•When the items whose settings differ have been registered in the <PF1> and <PF2> function buttons, the settings that correspond to each operation mode will be displayed so that the settings can be performed for each operation mode.
•If items, whose selection options are not displayed due to the operation mode, have been registered in the <PF1> or <PF2> function button, when an operation mode in which these options are not displayed is selected, what has been registered is saved but the function button itself will become blank and cannot be operated. Bear in mind, however, that when the data is registered again, it is saved by overwriting the existing data so that the previously registered data will be lost.
<50P IN/OUT>
•When the items whose settings differ have been registered in the <50P IN/OUT>
What has been registered is saved, but bear in mind that when the data is registered again, it is saved by overwriting the existing data so that the previously registered data will be lost.
•If items, whose selection options are not displayed due to the operation mode, have been registered in the <50P IN/OUT>
No. | Menu item |
| System menu No.25 (SYSTEM FREQ) |
| ||||
|
|
|
|
|
| |||
59/60 | 23/24 | 50 |
| 25 (HD) | 25 (SD) | |||
|
|
|
| |||||
|
|
|
|
|
|
|
|
|
12 | SYS H (HD) | COARSE | j5H to 0H to 5H | j5H to 0H to 5H |
|
| j5H to 0H to 5H |
|
|
|
|
|
|
|
| ||
FINE | j1100 to 0 to 1100 | j1375 to 0 to 1375 |
| j1320 to 0 to 1320 |
| |||
|
|
|
| |||||
|
|
|
|
|
|
|
|
|
14 | SYS SC (SD) | j108 to 0 to 108 |
|
| j115 to 0 to 115 |
| ||
|
|
|
|
|
|
|
|
|
15 | VO SYS H (SD) | COARSE | j5H to 0H to 5H |
|
| j5H to 0H to 5H |
| |
|
|
|
|
|
|
| ||
|
| FINE | j858 to 0 to 858 |
|
| j864 to 0 to 864 |
| |
|
|
|
|
|
|
|
|
|
16 | SD SYS D (SD) | COARSE | j5H to 0H to 5H |
|
| j5H to 0H to 5H |
| |
|
|
|
|
|
|
| ||
FINE | j858 to 0 to 858 |
|
| j864 to 0 to 864 |
| |||
|
|
|
|
| ||||
|
|
|
|
|
|
|
|
|
| Setup menus |
|
|
|
|
|
| ||
|
|
|
|
|
|
|
| |
No. | Menu item |
| System menu No.25 (SYSTEM FREQ) |
| ||||
|
|
|
|
|
| |||
59/60 | 23/24 | 50 |
| 25 (HD) | 25 (SD) | |||
|
|
|
| |||||
|
|
|
|
|
|
|
|
|
109 | CAP.LOCK | 2F/4F | 2F | 2F/4F/8F |
| 2F | 2F | |
501 | VITC | 10L to 16L to 20L |
| 7L to 11L to 22L |
|
| 7L to 11L to 22L | |
502 | VITC | 10L to 18L to 20L |
| 7L to 13L to 22L |
|
| 7L to 13L to 22L | |
|
|
| INTSG |
| INTSG |
|
|
|
|
|
| HDSDI |
|
|
|
| |
600 | VIDEO IN SEL |
| HDSDI |
|
|
| ||
SDTI |
|
|
|
| ||||
|
|
|
| SDSDI |
|
|
| |
|
|
| SDSDI |
|
|
|
| |
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
The underlining (__) denotes the factory setting mode. |
|
|
|
|
| |||
(Continued on next page) |
|
|
|
|
|
| ||
106