Specifications

[GENERAL]

Power supply: AC 100–240V, 50–60 Hz (AJ-HD1700P) AC 100–240V, 50–60 Hz (AJ-HD1700E)

Power consumption: 240W

indicates the safety information.

Operating ambient temperature:

41xF to 104xF (5xC to 40xC)

Operating ambient humidity: 10% to 80% (no condensation)

Weight:

Approx. 48.4 lbs (22 kg)

Dimensions (W k H k D):

16-3/4 (max. 17-3/16 ) k 6-15/16 k 17-11/16 inches

(not including supporting feet, jacks and connectors, JOG dial and fan)

424 (max. 435.4) k 175.2 k 448.9 mm

Recording format:

DVCPRO HD-LP

Video signals recorded:

1080i (50/59.94/60 Hz switchable)

720p (59.94/60 Hz switchable) 480i/59.94 Hz

576i/50 Hz (when optional board AJ-UC1700G is installed)

Audio signals recorded:

48 kHz, 16 bits, 8 channels

Recording tracks: Digital video/audio:

helical tracks

(Time code is recorded in sub-code area.) Cue track:

1track Control track:

1track

Tape speed:

67.64mm/sec. (in 59.94 Hz mode)

67.70mm/sec. (in 60 or 50 Hz mode)

Tape used:

Metal tape

Recording time:

126 minutes (using XL cassette)

92 minutes (using L cassette)

32 minutes (using M cassette)

FF/REW time:

Approx. 1 min. 30 sec. (when XL cassette is used and i100k or j100k speed is selected)

Search speed:

d100k

Digital slow:

j1k to i2k (when playing back tapes recorded using the DVCPRO HD-LP format)

j1k to i1.1k (when playing back tapes recorded using any other format)

Editing accuracy:

d0 frames (when time code is used, in 50 Hz, 59.94 Hz or 60 Hz mode)

Tape timer accuracy:

d1 frame (when continuous CTL signal is used)

Servo lock time:

Less than 0.3 sec. (from standby ON)

Loading time:

Approx. 4 sec.

Audio split editing:

Provided

[VIDEO]

Sampling frequencies:

Y:74.25 MHz, Pb/Pr: 37.125 MHz

Quantizing: 8 bits

Video compression method: DCT i variable length code

Video compression rate: 1/6.7

Error correction: Reed-Solomon product code

Video recording bit rate: 100 Mbps

Video Input Connectors

HD serial digital input:

BNC k 1 (complies with SMPTE 292M standard), BNC k 1 (active-through)

SD serial digital input (option):

BNC k 1 (complies with SMPTE 259M-C standard), BNC k 1 (active-through)

SDTI input (option):

BNC k 1 (complies with SMPTE 305M/SMPTE 321M standards)*

HD reference input:

BNC k 2 (loop-through), 75™ ON/OFF selectable

SD reference input:

BNC k 2 (loop-through), 75™ ON/OFF selectable

Video Output Connectors

HD serial digital output:

BNC k 3 (complies with SMPTE 292M standard), BNC k 1 (monitor output with superimposed display)

SD serial digital output:

BNC k 1 (complies with SMPTE 259M-C/SMPTE 294M standards),

BNC k 1 (monitor output with superimposed display)

SDTI output (option):

BNC k 1 (complies with SMPTE 305M/SMPTE 321M standards)

HD reference output:

BNC k 1

SD reference output:

BNC k 1

Analog composite output:

BNC k 3, VIDEO 1, VIDEO 2 (WFM OUT), VIDEO 3 (superimposed ON/OFF), output during SD playback or during down-conversion

*The optional AJ-UC1700G SD serial digital input board and optional AJ-YAC150P SDTI input board cannot be installed at the same time. Install one or the other.

130