Function menus

<CUE>

Clearing registered points

$ Clearing all the registered points together

When F5 (AL CLR) on the <CUE> menu is pressed while the F button is held down, all the cue point data currently selected is cleared. The range of the points which are cleared is as follows depending on the setting for F3 (PAGE) on the <CUE SHIFT> menu.

When “MANU” is set:

All the points on the currently selected page are cleared.

When “AUTO” is set:

All the points on all the pages are cleared.

After clearing, the search and registered points appear as follows depending on the setting for F3 (PAGE) on the <CUE SHIFT> menu.

When “MANU” is set:

A return is made to the top (CUE¢1) of the page concerned.

When “AUTO” is set:

A return is made automatically to the top (CUE01) of the first page.

*Points are cleared whether “ENTRY” (cue point registration mode) or “SEARCH” (search mode) is selected as the setting for [ F3 ] (MODE) on the <CUE> menu.

$Clearing individual registered points

When the F4 (CLR) button on the <CUE> menu is

pressed, the currently selected cue point data is cleared.

*The point is cleared only when “ENTRY” (cue point registration mode) is selected as the setting for F3 ] (MODE) on the <CUE> menu.

Search operations

Turn the ADJUST dial to highlight the desired registered point.

When the PREROLL button is pressed, the preroll operation is initiated. The tape will not be prerolled if no cue points have been registered.

Since the tape is not prerolled even if the PREROLL button is pressed when the cue point registration mode is established, be absolutely sure to check that the search mode is established.

(The time selected by the <CUE SHIFT> menu [ F5

(CU-ROL) setting, which is different from the normal preroll time, takes effect as the preroll time in this mode.)

Function

Switching

Setting

Corresponding setup

Description of setting

button/item

method

menu item

 

 

 

 

 

 

 

 

 

 

 

 

F1

Press

___

___

For multi-cue page forward scrolling.

PREV

 

 

 

 

 

 

 

 

 

F2

Press

___

___

For multi-cue page reverse scrolling.

NEXT

 

 

 

 

 

 

 

 

 

F3

Toggle

SEARCH

___

For selecting the search or cue point registration mode.

MODE

 

ENTRY

 

 

 

 

 

 

 

F4

Press

___

___

For clearing the currently selected cue data.

CLR

 

 

 

ENTRY must be selected as the F3 (MODE) setting.

 

 

 

 

 

F5

FiPress

___

___

When MANU is selected by SHIFT + F3 (PAGE): All the cue

AL CLR

 

 

 

data on the currently displayed page is cleared.

 

 

 

 

When AUTO is selected by SHIFT + F3 (PAGE): All the cue

 

 

 

 

data on all the pages is cleared.

 

 

 

 

 

F6

___

___

___

___

___

 

 

 

 

 

 

 

 

 

F2 (SHIFT)

FiPress

___

___

For calling the MULTI CUE file operation menu.

CARD

 

 

 

 

 

 

 

 

 

F3 (SHIFT)

Toggle

MANU

No. 131

Refer to the setup menu.

PAGE

 

AUTO

PAGE MODE

 

 

 

 

 

 

F4 (SHIFT)

Toggle

OFF

No. 132

Refer to the setup menu.

ROTATE

 

ON

ROTA MODE

 

 

 

 

 

 

F5 (SHIFT)

Toggle i

0s --- 5s ---

No. 011

Refer to the setup menu.

CU-ROL

ADJ

15s

CU-ROLL TIME

 

 

 

 

 

 

F6 (SHIFT)

___

___

___

___

___

 

 

 

 

*The underlining (__) denotes the factory setting mode.

*This item is not displayed when the 23/24 Hz or 25 Hz (HD or SD) mode has been selected as the system menu item No.25 (SYSTEM FREQ) setting.

54