Setup menus
<EDIT> (continued)
No./Item |
| Description of setting |
|
| |
|
| |
320*1 | For setting the allocation of the channels for | |
| the analog audio presets of a controller when | |
EDIT RPLCE1 | a controller without a function to control the | |
| edit presets of the digital audio signals is | |
| used to edit the digital audio signals of the | |
| VTR. |
|
| The VTR’s CH1 edit presets are set to ON or | |
| OFF following the analog audio signals specified | |
| by the controller. | |
| 0000 | |
| Not set. | |
| 0001 | CH1: |
| The analog CH1 edit presets are followed. | |
| 0002 | CH2: |
| The analog CH2 edit presets are followed. | |
| 0003 | CH1+2: |
| The analog CH1 or CH2 edit presets are | |
| followed. | |
|
| |
321*1 | As with setup menu item No.320, the VTR’s | |
| CH2 edit presets are set to ON or OFF | |
EDIT RPLCE2 | following the analog audio signals specified | |
| by the controller. | |
| 0000 | |
| Not set. | |
| 0001 | CH1: |
| The analog CH1 edit presets are followed. | |
| 0002 | CH2: |
| The analog CH2 edit presets are followed | |
| 0003 | CH1+2: |
| The analog CH1 or CH2 edit presets are | |
| followed. | |
|
| |
322*1 | As with setup menu item No.320, the VTR’s | |
| CH3 edit presets are set to ON or OFF | |
EDIT RPLCE3 | following the analog audio signals specified | |
| by the controller. | |
| 0000 | |
| Not set. | |
| 0001 | CH1: |
| The analog CH1 edit presets are followed. | |
| 0002 | CH2: |
| The analog CH2 edit presets are followed | |
| 0003 | CH1+2: |
| The analog CH1 or CH2 edit presets are | |
| followed. | |
|
|
|
*1: This item is not displayed when the 23/24 Hz or 25 Hz (HD or SD) mode has been selected as the system menu item No.25 (SYSTEM FREQ) setting.
The underlining (__) denotes the factory setting mode.
No./Item |
| Description of setting |
|
| |
|
| |
323*1 | As with setup menu item No.320, the VTR’s | |
| CH4 edit presets are set to ON or OFF | |
EDIT RPLCE4 | following the analog audio signals specified | |
| by the controller. | |
| 0000 |
|
| Not set. | |
| 0001 | CH1: |
| The analog CH1 edit presets are followed. | |
| 0002 | CH2: |
| The analog CH2 edit presets are followed. | |
| 0003 | CH1+2: |
| The analog CH1 or CH2 edit presets are | |
| followed. | |
|
| |
324*1 | As with setup menu item No.320, the VTR’s | |
| CUE edit presets are set to ON or OFF | |
EDIT RPLCEC | following the analog audio signals specified | |
| by the editor or controller. | |
| 0000 | |
| Not set. | |
| 0001 | CH1: |
| The analog CH1 edit presets are followed. | |
| 0002 | CH2: |
| The analog CH2 edit presets are followed. | |
| 0003 | CH1+2: |
| The analog CH1 or CH2 edit presets are | |
| followed. | |
|
|
|
89
