Setup menus
<EDIT>
No./Item |
| Description of setting |
| ||||||
|
|
|
| ||||||
|
|
|
| ||||||
300 | For selecting the operation to be performed when | ||||||||
| an edit point has been set incorrectly (when the | ||||||||
IN/OUT DEL | OUT point comes before the IN point). |
| |||||||
| 0000 | MANU: |
|
|
|
|
|
|
|
| Editing is not performed unless the illegal edit | ||||||||
| point is cleared or set properly. |
|
| ||||||
| 0001 | AUTO: |
|
|
|
|
|
|
|
| The edit point which had already been input is | ||||||||
| cleared automatically. |
|
|
|
|
| |||
|
|
|
| ||||||
301 | For selecting whether to show a negative display | ||||||||
| (time code display area) when the IN point is | ||||||||
NEGA FLASH | greater than the OUT point. |
|
| ||||||
| 0000 | OFF: |
|
|
|
|
|
|
|
| A negative display is not shown. |
|
| ||||||
| 0001 | ON: |
|
|
|
|
|
|
|
| A negative display is shown. |
|
| ||||||
|
|
|
| ||||||
302 | For selecting whether to perform simultaneous | ||||||||
| playback during editing. |
|
|
|
|
| |||
CONFI EDIT | 0000 | OFF: | Simultaneous playback is not | ||||||
|
|
|
| performed. |
|
| |||
| 0001 | ON: |
| Simultaneous | playback | is | |||
|
|
|
| performed. |
|
| |||
| <Note> |
|
|
|
|
|
|
|
|
| Simultaneous playback takes effect when TAPE is | ||||||||
| selected | as the | F1 key |
|
|
| setting on | the | |
|
| OUTPUT |
| ||||||
| <HOME> menu. Refer to setup menu item No.140 as | ||||||||
| well. |
|
|
|
|
|
|
|
|
|
| ||||||||
303*1 | For selecting how to connect the digital audio | ||||||||
| edit IN points. |
|
|
|
|
|
|
| |
AUD EDIT | 0000 | CUT: |
| Cut processing |
|
| |||
IN | 0001 | FADE: |
|
| |||||
|
| ||||||||
304*1 | For selecting how to connect the digital audio | ||||||||
| edit OUT points. |
|
|
|
|
|
| ||
AUD EDIT | 0000 | CUT: |
| Cut processing |
|
| |||
OUT | 0001 | FADE: |
|
| |||||
|
| ||||||||
305 | For selecting whether to register the IN points | ||||||||
| using the PREROLL button in cases where | ||||||||
AUTO ENTRY | the IN points have not been registered. |
| |||||||
| 0000 | DIS: | The | IN points are | not | ||||
|
|
|
| registered. |
|
| |||
| 0001 | ENA: The IN points are registered. |
| ||||||
|
| ||||||||
306*1 | For selecting the deck whose the color | ||||||||
| framing is to be adjusted during | ||||||||
CF ADJ SEL | editing. |
|
|
|
|
|
|
|
|
| 0000 PLAYER: |
|
|
|
|
|
|
| |
| The player’s IN and OUT points are adjusted | ||||||||
| (using the recorder as the reference). |
| |||||||
| 0001 RECORD: |
|
|
|
|
|
|
| |
| The recorder’s IN and OUT points are adjusted | ||||||||
| (using the player as the reference). |
| |||||||
|
| ||||||||
307 | For selecting the VTR’s mode upon | ||||||||
| completion of the |
| |||||||
AFTER | 0000 | STOP: |
|
|
|
|
|
|
|
| The VTR is set to the STOP mode. |
| |||||||
| 0001 | STILL: |
|
|
|
|
|
|
|
| The VTR is set to the still picture (SHTL STILL) | ||||||||
| mode. |
|
|
|
|
|
|
| |
| 0002 | STILL2: |
|
|
|
|
|
|
|
| The VTR is set to the still picture (VAR STILL) | ||||||||
| mode. |
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
No./Item |
| Description of setting | |
|
| ||
|
| ||
308 | For setting the maximum speed of VAR FWD. | ||
| 0000 | i4.9: | i4.9 times normal tape speed |
VAR FWD | 0001 | i2: | i2 times normal tape speed |
MAX |
|
| (i1.85 times normal tape |
|
|
| speed for formats other than |
|
|
| DVCPRO |
| 0002 | i1: | i1 times normal tape speed |
| <Notes> |
|
|
| • At any setting other than 0 (i4.9), phase adjustments | ||
| cannot be conducted from the editing controller. | ||
| • Depending on | the format used, the actual tape | |
| running speed differs slightly from what is indicated | ||
| by the superimposed display. | ||
|
| ||
309 | For setting the maximum speed of VAR REV. | ||
| 0000 | j4.9: | j4.9 times normal tape speed |
VAR REV MAX | 0001 | j2: | j2 times normal tape speed |
|
|
| (j1.85 times normal tape |
|
|
| speed for formats other than |
|
|
| DVCPRO |
| 0002 | j1: | j1 times normal tape speed |
| <Note> |
|
|
| Depending on the format used, the actual tape running | ||
| speed differs slightly from what is indicated by the | ||
| superimposed display. | ||
|
| ||
310 | For setting the maximum speed of JOG FWD. | ||
| 0000 | i4.9: | i4.9 times normal tape speed |
JOG FWD | 0001 | i2: | i2 times normal tape speed |
MAX |
|
| (i1.85 times normal tape |
|
|
| speed for formats other than |
|
|
| DVCPRO |
| 0002 | i1: | i1 times normal tape speed |
| <Notes> |
|
|
| At any setting other than 0 (i4.9), phase adjustments | ||
| cannot be conducted from the editing controller which | ||
| performs these adjustments by the JOG command. | ||
|
| ||
311 | For setting the maximum speed of JOG REV. | ||
| 0000 | j4.9: | j4.9 times normal tape speed |
JOG REV MAX | 0001 | j2: | j2 times normal tape speed |
|
|
| (j1.85 times normal tape |
|
|
| speed for formats other than |
|
|
| DVCPRO |
| 0002 | j1: | j1 times normal tape speed |
|
| ||
312 | For setting the postroll time. | ||
| Any time from 0 to 5 seconds can be set in 1- | ||
POSTROLL | second increments. | ||
TM | 0000 | 0s |
|
| 0001 | 1s |
|
| 0002 | 2s |
|
| 0003 | 3s |
|
| 0004 | 4s |
|
| 0005 | 5s |
|
|
|
|
|
*1: This item is not displayed when the 23/24 Hz or 25 Hz (HD or SD) mode has been selected as the system menu item No.25 (SYSTEM FREQ) setting.
The underlining (__) denotes the factory setting mode.
88
