Panasonic HD1700pe manual Setup menus, Basic

Setup menus

<BASIC>

No./Item		Description of setting
000	For setting the preroll time.
P-ROLL TIME	Any time from 0 to 30 seconds can be set in 1-
	second increments.
	0000	0s
	:	:
	0005	5s
	:	:
	0030	30s
	<Notes>
	• During automatic editing (PREVIEW or AUTO EDIT),
	no operations are performed if the preroll time is set
	to 0 seconds.
	• If the phases are to be synchronized between two
	decks for editing as per the setup menu item No.004
	(SYNCHRONIZE) setting, set the preroll time to at
	least 2 seconds.
001	For selecting the transport system buttons
	which can be operated on the front panel in
LOCAL ENA	the REMOTE mode.
	0000	DIS: No buttons can be operated.
	0001	ST&EJ:
	Only the STOP and EJECT buttons can be
	operated.
	0002	ENA:
	All the buttons except for the RECORDER and
	PLAYER buttons can be operated.
	<Note>
	The following buttons and dials function at all times
	regardless of this setting:
	Audio input/output level control dials, audio channel
	selector buttons, number keys, function buttons, direct
	menu button, ASSEM button, INSERT button, ADJ dial,
	headphone volume control dial, MONITOR SELECT
	button, METER (FULL/FINE) selector switch, REMOTE
	button.
002*1	For selecting the 12- or 24-hour system for
	the CTL counter display.
TAPE TIMER	0000	d12h:	12-hour system display
	0001	24h:	24-hour system display
003	For selecting whether or not to display REMAIN
	(remaining tape time) on the superimposed
REMAIN SEL	display	of the HD SDI MONITOR, SD SDI
	MONITOR and VIDEO OUT3 connectors.
	0000	OFF:
	The remaining tape time is not displayed.
	0001	2L:
	The remaining tape time is displayed on the
	second line.
	0002	1L:
	The remaining tape time is displayed on the
	first line.
	0003	R/TTL:
	The remaining tape time is displayed on the
	first line, and the total tape time is displayed on
	the second line.
	<Notes>
	• When setting 1 (2L) has been selected, the remaining
	tape time is not displayed if 0 (TIME) is selected as
	the setup menu item No.006 (DISPLAY SEL) setting.
	• When	setting 3 (R/TTL) has been selected, the
	remaining tape time is not displayed if 0 (TIME) is
	selected as the setup menu item No.006 (DISPLAY
	SEL) setting.

No./Item		Description of setting
004*1	For setting whether or not to synchronize the
	phases between two decks.
SYNCHRONIZE	0000	OFF:
	The phases are not synchronized. The edit
	points will be off by several frames but editing
	will be commenced more promptly.
	0001	ON:
	The phases are synchronized. Error-free
	editing can be performed.
005	For selecting whether or not to superimpose
	the display of the time code or other data
SUPER	onto the HD SDI MONITOR, SD SDI MONITOR
	and VIDEO OUT3 connectors.
	0000	OFF:
	The time code or other data is not displayed.
	0001	ON:
	The time code or other data is displayed.
006	For selecting the time code and other
	displays to be superimposed onto the HD SDI
DISPLAY SEL	MONITOR, SD SDI MONITOR and VIDEO
	OUT3 connectors.
	0000	TIME:
	Only the time is displayed.
	0001	T&STA:
	The time and operation mode are displayed.
	0002	T&S&M:
	The time, operation mode and mode are
	displayed.
	0003	T&RT:
	The time and REC TIME are displayed.
	0004	T&YMD:
	The time and REC DATE (year/month/day) are
	displayed.
	0005	T&MDY:
	The time and REC DATE (month/day/year) are
	displayed.
	0006	T&DMY:
	The time and REC DATE (day/month/year) are
	displayed.
	0007	T&UB:
	Data and user’s bit are displayed.
	However, when UB has been selected with the
	F3 (TC/CTL) on the HOME menu, the time
	code is displayed after the user’s bit.
	0008	T&CTL:
	Data and CTL data are displayed.
	However, when CTL has been selected with
	the F3 (TC/CTL) on the HOME menu, the time
	code is displayed after the CTL data.
	0009	T&T:
	Data and time code are displayed.
		(See Notes on next page.)

*1: This item is not displayed when the 23/24 Hz or 25 Hz (HD or

SD) mode has been selected as the system menu item.

The underlining (__) denotes the factory setting mode.

81