Superimpose screen
The control signals, time code, etc. are displayed on this screen using abbreviations.
TV monitor
TCR 22 : 22 : 22 : 22
Abbreviations
CTL: Control signal count value
TCR: Time code data recorded in the SBC area
TCR.: Time code data recorded in the VAUX area
UBR: User’s bit data recorded in the SBC area
UBR.: User’s bit data recorded in the VAUX area
TCG: Time code data of the time code generator
UBG: User’s bit data of the time code generator
<Note>
[T2R], [T2R.], [U2R] or [U2R.] is displayed when the data has not been read correctly from the tape.
Display position
The position of the characters superimposed on the display can be changed using F2 (C HPOS) and F3
(C VPOS) on the <TC SHIFT> menu and the ADJ dial.
|
| TCR 22 : 22 : 22 : 22 |
|
|
|
TCR 22 : 22 : 22 : 22 |
|
|
TV monitor |
| TV monitor |
Operation mode
The VTR’s operation mode can also be displayed using F4 (DISPLY) on the <TC SHIFT> menu.
Characters displayed
The background of the characters superimposed on the display screen can be changed using F5 (C TYPE) on the <TC SHIFT> menu.
TCR 22 : 22 : 22 : 22 |
|
STOP | VTR operation mode |
TV monitor
TCR 22 : 22 : 22 : 22 | TCR 22 : 22 : 22 : 22 |
TV monitor | TV monitor |
<Note>
When the 23/24 Hz mode has been selected as the system menu item No.25 (SYSTEM FREQ) setting, the time code and other information superimposed on the MONITOR and VIDEO OUT3 connectors are not displayed.
113
