Panasonic HD1700pe INPUT CHECK output specifications

Parts and Their Functions

Front panel

INPUT CHECK output specifications

VIDEO (59/60 Hz mode)

Input selection	INT SG	HD SDI
(MENU 600)			SD SDI	SDTI
	(59.94Hz/	(59.94Hz/
			(59.94Hz)	(59.94 Hz)
	60Hz)	60Hz)
Output system
HD SDI	INT SG	HD SDI	MUTE	Same as
(MONITOR)	(selected
		(input signal)	(BLACK)	main system*
(59.94Hz/60Hz)	signal)
SD SDI	MUTE	MUTE	SD SDI	Same as
(MONITOR)
	(BLACK)	(BLACK)	(input signal)	main system*
(59.94Hz)
LCD	INT SG	HD SDI	SD SDI	Same as
(MONITOR)	(selected
		(input signal)	(input signal)	main system*
(59.94Hz/60Hz)	signal)
VIDEO OUT3	Same as	Same as	Same as	Same as
(59.94Hz)	main system*	main system*	main system*	main system*

VIDEO (50 Hz mode)

Input selection
(MENU 600)	INT SG	HD SDI	SD SDI
	(50Hz)	(50Hz)	(50Hz)
Output system
HD SDI	INT SG	HD SDI	MUTE
(MONITOR)	(selected
		(input signal)	(BLACK)
(50Hz)	signal)
SD SDI	MUTE	MUTE	SD SDI
(MONITOR)
	(BLACK)	(BLACK)	(input signal)
(50Hz)
LCD	INT SG	HD SDI	SD SDI
(MONITOR)	(selected
		(input signal)	(input signal)
(50Hz)	signal)
VIDEO OUT3	Same as	Same as	Same as
(50Hz)	main system*	main system*	main system*

<Notes>

•The AJ-UC1700G (optional accessory) is required to select the SD SDI input signals.

•The AJ-YAC150P (optional accessory) is required to select the SDTI input signals.

•When the INT SG input signal is selected, the signals are selected by menu item No.601.

•When the 23/24 Hz mode or 25 Hz (HD or SD) mode is selected, the INPUT CHECK operation is not performed.

*When the SDTI input is selected, the INPUT CHECK operation is not performed.

AUDIO

Output system	MONITOR (L, R) selection
	CH1 to CH8	CUE
	Audio input which has been	Same as main
MONITOR L	set by the channels selected
		system*1
	as L channels*2
	Audio input which has been	Same as main
MONITOR R	set by the channels selected
		system*1
	as R channels*2
	Audio input which has been	Same as main
HEAD PHONE L	set by the channels selected
		system*1
	as L channels*2
	Audio input which has been	Same as main
HEAD PHONE R	set by the channels selected
		system*1
	as R channels*2
HD SDI (MONITOR)	Same as main system*1*3
(embedded audio)
SD SDI (MONITOR)	Same as main system*1*3
(embedded audio)

*1: The INPUT CHECK operation is not performed. The signals corresponding to the VTR operation mode are output.

*2: This is set using setup menu items No.713 to 724. However, the INPUT CHECK operation is not performed when video input SDTI is selected.

*3: Noise may occur if the video input and OUTREF signals are not synchronized.

15