Panasonic HD1700pe manual Basic

Setup menus

<BASIC> (continued)

No./Item		Description of setting
006	<Notes>
	• The following mode displays appear depending on
DISPLAY SEL	the format used.			<Display>
	<Format>
	DVCPRO HD-LP		>	DVCPRO_HD-LP
	DVCPRO HD		>	DVCPRO_HD
	DVCPRO50		>	DVCPRO_50
	DVCPRO		>	DVCPRO
	DV		>	DV
	DVCAM		>	DVCAM
	• When setting 2		(T&S&M) is selected, an error
	message appears if a warning or error has occurred.
	• REC TIME and REC DATE are displayed only during
	DV or DVCAM format playback. The operation mode
	is displayed when the DVCPRO HD-LP, DVCPRO
	HD, DVCPRO50 or DVCPRO format is used.
007	For setting the horizontal positions of the
	characters for the time code and other
CHARA	superimposed		displays		of	the	HD	SDI
H-POS	MONITOR,	SD SDI MONITOR and VIDEO
	OUT3 connectors.
	0000	0
	:	:
	0006	6
	:	:
	0037	37
	<Note>
	When this menu item has been set, the displays are
	output to the VIDEO OUT3 connector in the DISPLAY
	SEL status even when the SUPER OFF setting is
	established. However, if the menu has been exited, the
	SUPER OFF or ON setting is followed.
	Furthermore, CHARA TYPE is output to the VIDEO
	OUT3 connector as per the menu setting.
008	For setting the vertical				positions of			the
	characters for the time code and other
CHARA	superimposed		displays		of	the	HD	SDI
V-POS	MONITOR,	SD SDI MONITOR and VIDEO
	OUT3 connectors.
	0000	0
	:	:
	0023	23
	:	:
	0032	32
	<Note>
	When this menu item has been set, the displays are
	output to the VIDEO OUT3 connector in the DISPLAY
	SEL status even when the SUPER OFF setting is
	established. However, if the menu has been exited, the
	SUPER OFF or ON setting is followed.
	Furthermore, CHARA TYPE is output to the VIDEO
	OUT3 connector as per the menu setting.

*1: This item is not displayed when the 23/24 Hz or 25 Hz (HD or SD) mode has been selected as the system menu item No.25 (SYSTEM FREQ) setting.

*2: This item is not displayed when the 23/24 Hz, 25 Hz (HD or SD) or 50 Hz mode has been selected as the system menu item No.25 (SYSTEM FREQ) setting.

The underlining (__) denotes the factory setting mode.

No./Item		Description of setting
009	For setting the display type for the
	superimposed displays and for the HD SDI
CHARA TYPE	MONITOR, SD SDI MONITOR and VIDEO
	OUT3 connectors as well as for the SETUP
	MENU, etc.
	0000	WHITE: White characters on a black
		background.
	0001	W/OUT: White characters with black
		borders.
010*1	For setting whether to forcibly set the recorder to
	the EE mode and output the player’s playback
MONI	signals to the monitor if the PLAYER button on the
CONTROL	recorder is pressed when the monitor is connected
	only to the recorder during deck-to-deck editing.
	0000	MANU:
	The recorder is not forcibly set to the EE mode.
	0001	AUTO:
	The recorder is forcibly set to the EE mode,
	and the player’s playback signals are output.
011	For setting the preroll time in the MULTI CUE
	mode.
CU-ROLL	Any time from 0 to 15 seconds can be set in 1-
TIME	second increments.
	0000	0s:
	:	:
	0005	5s:
	:	:
	0015	15s:
015	For selecting the save processing to be
	conducted when the memory capacity, which
AUTO	enables up to 99 warning messages to be
STEP	saved, has been exceeded while the error log
	function is operating.
	0000	OFF:
	99 messages are set as the upper limit, and any
	more warning messages which subsequently
	occur are not saved in the memory.
	0001	ON:
	99 messages are saved, and the next warning
	message that has subsequently occurred is
	saved as No.99. The warning messages already
	saved are each shifted down by one number in
	succession.
020*2	For selecting the VTR’s recording format.
	0000	1080i:
SYS	The 1080i format is selected.
FORMAT	0001	720p:
	The 720p format is selected.

82