Function menus

<HOME> Status display 2

Indicator

Description of setting

 

 

 

 

SCH

This lights when the SCH phase of the SDREF

 

signal is within the prescribed range.

 

 

CF

This lights when color framing is locked.

 

 

DF

This lights during recording or playback in the

 

drop frame mode.

 

<Note>

 

If the time code data could not be read properly

 

(“T¢R” is displayed), the display of the previous

 

status is held.

 

 

Operation mode (speed) display

This indicates the current operation mode (including the speed display).

Display

 

Operation mode

 

 

 

 

 

 

 

 

 

EJECT

Eject mode

 

 

 

 

 

 

STANDBY OFF

Standby OFF mode

 

 

T.RELEASE

Tension release mode

 

 

 

 

 

 

STOP

Stop mode

 

 

 

 

 

 

PREROLL

Preroll mode

 

 

 

 

 

 

PLAY

Playback mode

 

 

 

 

 

 

 

PLAY i

Special

playback

(playback

phase

 

adjustment) mode (FWD direction)

 

 

 

 

 

 

PLAY j

Special

playback

(playback

phase

 

adjustment) mode (REV direction)

 

 

 

 

 

REC

Recording mode

 

 

 

 

 

 

 

JOG

Jog mode

 

 

 

REV/STILL/FWD

 

 

 

 

 

 

 

 

VAR (speed)

Variable mode

 

 

[j4.9 to i4.9]

 

 

 

 

 

 

 

 

SHTL (speed)

Shuttle mode

 

 

[j32.0 to i32.0]

 

 

 

 

 

 

 

 

FF

Fast forwarding mode

 

 

 

 

 

 

REW

Rewinding mode

 

 

 

 

 

 

EDIT

Editing mode

 

 

 

 

 

AUTO EDIT

Automatic editing mode

 

 

 

 

 

PREVIEW

Preview mode

 

 

 

 

 

 

REVIEW

Review mode

 

 

 

 

 

When function F6 (VARMEM) on <HOME SHIFT> is “ON”

 

 

DSPD (speed)

Initial speed setting of variable memory

[j1.0 to i2.0]

 

 

 

 

 

 

DSMP (speed)

Playback speed memory mode of variable

[j1.0 to i2.0]

memory

 

 

 

 

 

 

DPLY (speed)

Playback mode of variable memory

 

[j1.0 to i2.0]

 

 

 

 

 

 

DPRV (speed)

Preview mode of variable memory editing

[j1.0 to i2.0]

 

 

 

 

 

 

DEDT (speed)

Execution mode of variable memory editing

[j1.0 to i2.0]

 

 

 

 

 

 

 

 

 

Remaining tape/total tape display

The lengths of the remaining tape and total tape of the inserted cassette are displayed in increments of minutes.

Example: REM 10/ 92 (10 minutes remaining on a 92-minute tape)

Total tape

Remaining tape

<Note>

Slight errors may occur. The remaining tape value blinks when less than 3 minutes of the tape remain.

Cue time display

This displays the currently registered cue time. (For details on the cue time operation, refer to “Cue point registration, preroll and cue-up.”)

Cue time operations can be performed on the HOME screen only.

Time counter displays

Display

Description

 

 

 

 

CTL

CTL counter data

 

 

TCG

Time code data of time code generator

UBG

User’s bit data of time code generator

 

 

tcg

When the time code data of time code

 

generator is preset

 

 

ubg

When the user’s bit data of time code

 

generator is preset

 

 

TCR/T¢R

Time code data of time code reader

UBR/U¢R

User’s bit data of time code reader

If the time code data or user’s bit data could not be read out properly, “T¢R” or “U¢R” is displayed. If the CTL signal is present, the time code data is supplemented by CTL.

TCR 00:00:00:00.

Field mark

 

 

 

[1st field: “ ”/2nd field: “.”]

 

 

 

 

 

 

(This does not appear when the i0.3k or

 

 

 

j0.3k speed is exceeded.)

 

 

 

Drop frame mark (59/60 Hz mode only)

 

 

 

 

 

 

[Non-drop frame mode: “:”/drop frame

 

 

 

mode: “.”]

Variable memory mode indicator

This is displayed when the F6 (VARMEM) function button on <HOME SHIFT> is set to “ON.” While VM is lighted, variable memory operations can be performed at any time.

(For details, refer to “Variable memory function.”)

44