Panasonic HD1700pe CH2 CUE SEL, CH3 CUE SEL, CH4 CUE SEL, CH5 CUE SEL, CH6 CUE SEL, CH7 CUE SEL

Setup menus

<AUDIO> (continued)

No./Item		Description of setting
739	For selecting the CH2 output status of the
	main signal line in the search mode.
CH2 CUE SEL	0000	OFF:
	The CUE signal is not output.
	0001	ON:
	The CUE signal is output.
	<Note>
	For details on the audio output statuses, refer to “Audio
	outputs in the search mode” on page 103.
740	For selecting the CH3 output status of the
	main signal line in the search mode.
CH3 CUE SEL	0000	OFF:
	The CUE signal is not output.
	0001	ON:
	The CUE signal is output.
	<Note>
	For details on the audio output statuses, refer to “Audio
	outputs in the search mode” on page 103.
741	For selecting the CH4 output status of the
	main signal line in the search mode.
CH4 CUE SEL	0000	OFF:
	The CUE signal is not output.
	0001	ON:
	The CUE signal is output.
	<Note>
	For details on the audio output statuses, refer to “Audio
	outputs in the search mode” on page 103.
742	For selecting the CH5 output status of the
	main signal line in the search mode.
CH5 CUE SEL	0000	OFF:
	The CUE signal is not output.
	0001	ON:
	The CUE signal is output.
	<Note>
	For details on the audio output statuses, refer to “Audio
	outputs in the search mode” on page 103.
743	For selecting the CH6 output status of the
	main signal line in the search mode.
CH6 CUE SEL	0000	OFF:
	The CUE signal is not output.
	0001	ON:
	The CUE signal is output.
	<Note>
	For details on the audio output statuses, refer to “Audio
	outputs in the search mode” on page 103.
744	For selecting the CH7 output status of the
	main signal line in the search mode.
CH7 CUE SEL	0000	OFF:
	The CUE signal is not output.
	0001	ON:
	The CUE signal is output.
	<Note>
	For details on the audio output statuses, refer to “Audio
	outputs in the search mode” on page 103.

The underlining (__) denotes the factory setting mode.

No./Item		Description of setting
745	For selecting the CH8 output status of the
	main signal line in the search mode.
CH8 CUE SEL	0000	OFF:
	The CUE signal is not output.
	0001	ON:
	The CUE signal is output.
	<Note>
	For details on the audio output statuses, refer to “Audio
	outputs in the search mode” on page 103.
746	For selecting the monitor output.
	0000	MANU:
MONI CH SEL	The signal selected by the MONITOR SELECT
	button is output.
	0001	AUTO:
	The PCM audio signal is output in the j1.0k
	to i2.0k speed range; the CUE signal is
	automatically output at all other speeds.
	0002	PCM:
	The PCM audio signal is output in the j32k to
	i32k speed range.
	<Notes>
	• When “AUTO” is selected and a tape in any format
	except DVCPRO HD-LP is played back, the PCM
	audio signals are output in the -1.0kto +1.1k speed
	range.
	• This setting takes effect when the L and R MONITOR
	SELECT switches on the VTR’s front panel have
	selected a channel from CH1 to CH8.
	(If they have selected CUE, the CUE signal is output
	at all speeds regardless of this menu item’s setting.)
747	For selecting the channel for the monitor
	output to be switched to CUE.
MON AUTO	When a setting other than “MANU” has been
SEL	selected for setup menu item No.746 (MONI CH
	SEL), the CUE signal is automatically output to
	the monitor output in accordance with the
	operation mode, and the monitor channel to be
	switched to CUE is selected automatically.
	0000	L/R: The CUE signal is output both
		to the Lch and Rch.
	0001	L: The CUE signal is output to the
		Lch only.
	0002	R: The CUE signal is output to the
		Rch only.
748	For selecting whether to enable or inhibit the
	operation of the MONITOR SELECT button on
MONI SEL INH	the front panel.
	0000	OFF: The button’s operation is
		enabled.
	0001	ON: The button’s operation is
		inhibited.
	0002	ON1: In the	FULL	display	mode,
		operation is prohibited; in the
		FINE	display	mode	only,
		operation is enabled.
	<Note>
	Whether to enable or inhibit the button’s operation can
	be selected for channels whose signals have not been
	mixed by the setup menu item No.737 (MONI MIX)
	setting.

101