
Error messages
Error messages
Display | • Description | |
• VTR operation and remedial action | ||
| ||
|
| |
|
| |
FRONT LOAD | If the cassette fails to move up even after 6 seconds | |
MOTOR | have elapsed since the VTR transferred to the EJECT | |
| mode, the AUTO OFF lamp lights, and the message | |
| display blinks. | |
| <Note> | |
| If the cassette fails to move down even after 6 seconds | |
| have elapsed since the cassette was inserted, the VTR | |
| transfers to the EJECT mode. | |
| VTR: Stops. | |
| • Set the POWER switch to OFF and then back to ON | |
| again. | |
|
| |
LOADING | If the unloading operation fails to be completed within 6 | |
MOTOR | seconds, the AUTO OFF lamp lights, and the message | |
| display blinks. | |
| <Note> | |
| If the loading operation fails to be completed within 6 | |
| seconds, the VTR transfers to the EJECT mode | |
| (unloading mode). | |
| VTR: Stops. | |
| • Set the POWER switch to OFF and then back to ON | |
| again. | |
|
| |
REEL DIR | If the | |
UNMATCH | direction, the AUTO OFF lamp lights, and the message | |
| display blinks. | |
| VTR: Stops. | |
| • Set the POWER switch to OFF and then back to ON | |
| again. | |
|
| |
REEL | If an abnormal tension at the supply side is detected in | |
TENSION | the reel mode, the AUTO OFF lamp lights, and the | |
ERROR | message display blinks. | |
| VTR: Stops. | |
| • Set the POWER switch to OFF and then back to ON | |
| again. | |
|
| |
SERVO COMM | When the servo microcomputer does not follow the | |
ERROR | instructions of the system control microcomputer even | |
| after 10 seconds have elapsed, the AUTO OFF lamp | |
| lights, and the message display blinks. | |
| VTR: Stops. | |
| • Set the POWER switch to OFF and then back to ON | |
| again. | |
|
| |
SERVO | When there is no response from the servo | |
CONTROL | microcomputer for 1 or more seconds, the AUTO OFF | |
ERROR | lamp lights, and the message display blinks. | |
| VTR: Stops. | |
| • Set the POWER switch to OFF and then back to ON | |
| again. | |
|
| |
SERVO | When only the servo microcomputer was reset in an | |
ERROR | instantaneous power failure, etc., the AUTO OFF lamp | |
| lights, and the message display blinks. | |
| VTR: Stops. | |
| • Set the POWER switch to OFF and then back to ON | |
| again. | |
|
|
Display | • Description | ||
• VTR operation and remedial action | |||
| |||
|
|
| |
|
|
| |
| When the tape start or end processing operation is not | ||
TIMEOVER | completed, the AUTO OFF lamp lights, and the | ||
| message display blinks. | ||
| VTR: Stops. | ||
| • Set the POWER switch to OFF and then back to ON | ||
| again. | ||
|
|
| |
S REEL ROTA | If the supply reel motor rotates at an abnormally fast | ||
TOO FAST | rate, the AUTO OFF lamp lights, and the message | ||
| display blinks. | ||
| VTR: Stops. | ||
| • Set the POWER switch to OFF and then back to ON | ||
| again. | ||
|
|
| |
S REEL | If an abnormal torque applied to the supply reel motor | ||
TORQUE ERR | is detected or if an abnormal current flowing to the | ||
| |||
| lamp lights, and the message display blinks. | ||
| VTR: Stops. | ||
| • Set the POWER switch to OFF and then back to ON | ||
| again. | ||
|
|
| |
T REEL ROTA | If the | ||
TOO FAST | rate, the AUTO OFF lamp lights, and the message | ||
| display blinks. | ||
| VTR: Stops. | ||
| • Set the POWER switch to OFF and then back to ON | ||
| again. | ||
|
|
| |
T REEL | If an abnormal torque applied to the | ||
TORQUE ERR | is detected, the AUTO OFF lamp lights, and the | ||
| message display blinks. | ||
| VTR: Stops. | ||
| • Set the POWER switch to OFF and then back to ON | ||
| again. | ||
|
|
| |
UNLOAD | If the tape has not been wound up during unloading, | ||
ERROR | the AUTO OFF lamp lights, and the message display | ||
| blinks. | ||
| VTR: Stops. | ||
| • Set the POWER switch to OFF and then back to ON | ||
| again. | ||
|
|
| |
WINDUP | If, after the total tape amount has been detected, the | ||
ERROR | amount of tape wound up onto the | ||
| amount of tape supplied by the supply reel differ to an | ||
| abnormal extent while the tape is traveling, the AUTO | ||
| OFF lamp lights, and the message display blinks. | ||
| VTR: Stops. | ||
| • Set the POWER switch to OFF and then back to ON | ||
| again. | ||
|
|
| |
| If, after the cassette has been inserted, the tape take- | ||
NOT ROTA | up reel has not wound up the tape while the total tape | ||
| amount is not detected and while the tape is traveling, | ||
| the AUTO OFF lamp lights, and the message display | ||
| blinks. | ||
| VTR: Stops. | ||
| • Set the POWER switch to OFF and then back to ON | ||
| again. | ||
|
|
|
If the error message display persists even after the VTR has been shut down and started up again, consult your dealer.
121