Panasonic HD1700pe manual Sch Sd*Dw, AV Phase, Freq, Menu Lock

System menus

No./Item			Description of setting
18	For adjusting the SCH phase.
	When the			button is pressed, the display transfers to
			SHIFT
SCH (SD)*DW	the submenu screen; press the					button again to
					SHIFT
	return the display from the submenu				screen.
Submenu screen
00	For adjusting the SCH phase in 90o steps
	(The SC phase changes, and the H phase remains
COARSE	unchanged.)
		0000:	0
		0001:	90
		0002:	180
		0003:	270
01	For adjusting the SCH phase over a total variable
	range of more than d45o.
FINE	j: To advance the phase. i: To delay the phase.
	(The SC phase changes, and the H phase remains
	unchanged.)
		0000	j32
		:	:
		0032	0
		:	:
		0064	32
20	For adjusting the audio output phase in relation to
	the video output phase in 20.8¨s steps.
AV PHASE	j: The audio output phase is advanced in relation to
		the video output phase.
	i: The audio output phase is delayed in relation to
		the video output phase.
		0000	j100
		:	:
		0100	0
		:	:
		0200	100
25	For selecting the system frequency.
	0: The 59.94 Hz or 60 Hz system frequency is selected.
SYSTEM	1: The 50 Hz system frequency is selected.
FREQ*	2: The 23.98 Hz or 24 Hz system frequency is selected.
	3: The 25 Hz system frequency is selected.
		However, with SD SDI and video output signals, there
		is a delay of approximately one field compared with
		the HD SDI output.
	4: The 25 Hz system frequency is selected.
		However, HD SDI output is muted.
		0003	59/60
		0001*	50*	* The	asterisk	denotes the
		0002	23/24	factory setting for AJ-
		0003	25 (HD)	HD1700E
		0004	25 (SD)
		59/60 Hz mode:		Status in which “0” (59/60) has been
				selected
		50 Hz mode:		Status in which “1” (50) has been
				selected
		23/24 Hz mode:		Status in which “2” (23/24) has been
				selected
		25 Hz (HD) mode: Status in which “3” (25 (HD)) has been
				selected
		25 Hz (SD) mode: Status in which “4” (25(SD)) has been
				selected
	<Notes>
	•	This setting remains unchanged even when the
		factory setting operation is performed.
	•	For the steps to take to switch the system
		frequency, refer to page 105.

No./Item		Description of setting
30	For selecting whether to set or release the
	system file lock mode.
MENU LOCK	0000	OFF: Lock released (changes enabled)
	0001	ON: Lock set (changes prohibited)
	<Note>
	Even when “ON” is selected, the data will be overwritten
	when the system file has been set to LOAD from the IC
	card.

*System switching

•Some of the system menu and setup menu items each have different settings for different operation modes (59/60 Hz, 50 Hz, 23/24 Hz and 25 Hz (HD or SD)). These settings are saved separately.

(This concerns those items whose settings were described for each operation mode on the system menu and setup menu tables.)

•For further details, refer to “How to switch the system frequency” on page 105.

•Since this VTR becomes a playback-only unit when the 23/24 Hz or 25 Hz (HD or SD) mode has been selected, the functions relating to EE, recording and editing are all set to the inhibited status. Neither is it possible to select CTL in such a case.

(The related menus and function buttons are not displayed, and operation is prohibited.)

For the instant when the tape begins to run at the 1k speed such as when it starts playing from the STOP status, the image is disrupted and the sound is muted for several frames because the tape is being synchronized with the REF input.

The underlining (__) denotes the factory setting mode. *DW:This is for SD outputs (during SD tape playback or down-

conversion outputs).

80