Setup menus
<VIDEO> (continued)
No./Item |
|
|
|
| Description of setting | |||
|
|
|
|
|
| |||
|
|
|
|
|
| |||
636*2 |
|
| For selecting the HD output signal format | |||||
|
|
| during 480i tape (DVCPRO50, DVCPRO, DV or | |||||
480i>HD_ |
| DVCAM) playback. (See table below.) | ||||||
OUT |
|
| 0000 |
| 1080i |
| ||
|
|
| 0001 |
| 720p |
| ||
|
|
| 0002 |
|
| |||
|
|
|
|
|
| |||
637*2 |
|
| For selecting the SD output signal format | |||||
|
|
| during 480i tape (DVCPRO50, DVCPRO, DV or | |||||
480i>SD_ |
| DVCAM) playback. (See table below.) | ||||||
OUT |
|
| 0000 |
|
| 480i |
| |
|
|
| 0001 |
|
| 480i |
| |
|
|
| 0002 |
| 480p |
| ||
|
|
|
|
|
|
|
|
|
|
|
|
|
| Output connectors |
| ||
|
|
|
|
|
|
|
| |
|
| HD SDI OUT |
|
| SD SDI OUT |
| VIDEO OUT | |
|
|
|
|
|
|
| ||
0000 | 1080i (up- |
|
| 480i |
| 480i | ||
| converted output) |
| (no conversion) |
| (no conversion) | |||
|
|
|
|
|
|
| ||
0001 | 720p (up- |
|
| 480i |
| 480i | ||
| converted output) |
| (no conversion) |
| (no conversion) | |||
|
|
|
|
|
|
| ||
0002 | Muted |
|
| 480p* (up- |
| 480i | ||
|
|
|
|
|
| converted output) |
| (no conversion) |
|
|
|
|
|
|
|
|
|
<Note>
During SD tape playback, the VTR cannot be operated in the 60 Hz mode.
638*1 | For selecting the | ||||
| when SD SDI input signals are supplied. | ||||
IN U/C | 0000 | FIT_V: | Side panel mode | ||
|
|
|
|
| |
MODE | 0001 |
| FIT_H: Top and bottom cut in vertical | ||
|
|
|
|
| direction |
| 0002 | FIT_HV: | Stretch mode | ||
|
|
|
| ||
639*1 | For selecting the horizontal frequency band | ||||
| during the | ||||
I U/C RESP H | signals. |
| |||
| 0000 |
| STD |
| |
| 0001 | NARROW |
| ||
|
|
|
| ||
640*1 | For selecting the vertical frequency band | ||||
| during the | ||||
I U/C RESP V | signals. |
| |||
| 0000 |
| STD |
| |
| 0001 NARROW |
| |||
|
|
|
|
|
|
*1: This item is not displayed when the 23/24 Hz or 25 Hz (HD or SD) mode has been selected as the system menu item No.25 (SYSTEM FREQ) setting.
*2: This item is not displayed when the 23/24 Hz, 25 Hz (HD or SD) or 50 Hz mode has been selected as the system menu item No.25 (SYSTEM FREQ) setting.
*3: This item is not displayed when the 50 Hz or 25 Hz (HD or SD) mode has been selected as the system menu item No.25 (SYSTEM FREQ) setting.
*Setup menu item No.107 and INPUT CHECK do not function, and the same signal as this signal line is output.
<Note>
Setup menu items No.638, 639, 640, 641 and 642 do not function when the
The underlining (__) denotes the factory setting mode.
*UP: With HD output (HD tape playback or
*DW: With SD output (SD tape playback or
No./Item |
| Description of setting | |
|
| ||
|
| ||
641*2 | For accentuating the horizontal contours | ||
| during | ||
I U/C ENH | 0000 | 0dB |
|
H | 0001 | i0.7dB |
|
| 0002 | i1dB | <Note> |
| 0003 | i1.2dB | |
| 0004 | i1.5dB | The numbers on the superimposed |
| 0005 | i2dB | display are approximations only. |
|
| ||
642*2 | For accentuating the vertical contours during | ||
| |||
I U/C ENH | 0000 | 0dB |
|
V | 0001 | i0.7dB |
|
| 0002 | i1dB | <Note> |
| 0003 | i1.2dB | |
| 0004 | i1.5dB | The numbers on the superimposed |
| 0005 | i2dB | display are approximations only. |
|
|
|
|
650 | 0000* | CMPNT*: | Level adjustment mode for the |
|
|
| component style |
STYLE | 0001 | CMPST: | Level adjustment mode for the |
|
|
| composite style |
| * The asterisk denotes the factory setting for | ||
|
| ||
|
| ||
651*3 | For selecting the rotational axis of the chroma | ||
| phase adjustment. | ||
HUE STYLE | 0000 | The axis rotates in a perfect | |
(SD)*DW |
|
| circle on the SDI (component |
|
|
| style) vectorscope. |
| 0001 | The axis rotates in a perfect | |
|
|
| circle on the analog (composite |
|
|
| style) vectorscope. |
|
| ||
653 | For adjusting the Y level of the HD SDI output. | ||
| (j¶ to 0 dB to i3 dB) | ||
Y LVL (HD)*UP | 0000 | 0.0% |
|
| : | : | <Note> |
| 1000 | 100.0% | This setting takes effect when |
| : | : | “CMPNT” has been selected as the |
| 1413 | 141.3% | setup menu item No.650 setting. |
|
| ||
654 | For adjusting the PB level of the HD SDI | ||
| output. |
| |
Pb LVL | (j¶ to 0 dB to i3 dB) | ||
(HD)*UP | 0000 | 0.0% |
|
| : | : | <Note> |
| 1000 | 100.0% | This setting takes effect when |
| : | : | “CMPNT” has been selected as the |
| 1413 | 141.3% | setup menu item No.650 setting. |
|
| ||
655 | For adjusting the PB level of the HD SDI | ||
| output. |
| |
Pr LVL (HD)*UP | (j¶ to 0 dB to i3 dB) | ||
| 0000 | 0.0% | <Note> |
| : | : | |
| 1000 | 100.0% | This setting takes effect when |
| : | : | “CMPNT” has been selected as the |
| 1413 | 141.3% | setup menu item No.650 setting. |
|
| ||
656 | For adjusting the black level of the HD SDI | ||
| output. |
| |
BK LVL | 50 | j10.0% | <Note> |
(HD)*UP | : | : | |
| 150 | 0.0% | This setting takes effect when |
| : | : | “CMPNT” has been selected as the |
| 250 | i10.0% | setup menu item No.650 setting. |
|
|
|
|
95
