Function menus
<PF1/PF2>
Up to 24 frequently used setup menu items can be registered. The items are registered on the function menus shown below. (No settings have been registered before the VTR leaves the factory.)
To display one of the function menus, press F1 (PF1 FT), F2 (PF1 BK), F3 (PF2 FT) or F4 (PF2 BK) while holding down the F button on the <MENU SHIFT> screen.
Selection marker
Registered menu number
Menu name
SHIFT |
|
| F1 |
|
| F2 |
| F3 |
| F4 |
| F5 |
| F6 |
Item selection cursor
Item number
Category
Setting number
Setting
Item name
Item number
Registration
1.Selecting the function buttons
Turn the ADJ dial to move the selection marker, and select one of the function buttons F1 to F6 into which the menu items are to be registered.
2.Entering the function button Press the ADJ dial.
The display of the function button entered is highlighted.
3.Selecting menu items
Turn the ADJ dial, and select the menu item for the function button which was selected in step 1 above.
4.Entering the menu items. Press the ADJ dial.
The target of the ADJ dial operation returns to the front panel. Whatever was selected in step 3 above is displayed for the registered menu number and name.
5.To select a menu item for another function button, repeat steps 1, 2, 3 and 4 above.
6.Saving the settings in a PF registration file
To save what has been set in the function buttons in a PF registration file, press F5 (SET).
If F6 (EXIT) is pressed without the settings having been saved, the settings will be canceled.
When menu items are registered, they can be called simply by pressing the PF1 or PF2 direct menu button.
When | PF1 | is pressed : |
|
| |
<PF1 | FT> |
|
|
|
|
When |
| is pressed after pressing |
| : | |
SHIFT | PF1 | ||||
<PF1 | BK> |
|
|
|
|
When |
| is pressed : |
|
| |
PF2 |
|
| |||
<PF2 | FT> |
|
|
|
|
When |
|
| is pressed after pressing |
| : |
SHIFT | PF2 | ||||
<PF2 | BK> |
|
|
|
|
Clearing the menu items
1.Turn the ADJ dial to move the selection marker, and select one of the function buttons F1 to F6 whose menu items are to be cleared.
2.Press F4 (RESET). The registered menu number and name displays will now go blank.
3.To clear the menu items from other function buttons, repeat steps 1 and 2 above.
4.To save what has been set in the function buttons in a PF registration file, press F5 (SET).
If F6 (EXIT) is pressed without the settings having been saved, the above settings will be canceled.
Clearing all the function button settings
Press F4 (RESET) while holding down the F button. All the registered menu number and name displays will now go blank.
All the contents of the PF registration file are cleared. (They cannot be restored.)
64
