Panasonic HD1700pe manual Operation

Setup menus

<OPERATION>

No./Item		Description of setting
100	For selecting the direct search dial operation.
	0000	DIAL:
SEARCH ENA	Direct search dial operations are performed.
	0001	KEY:
	Operation does not transfer to the search
	mode unless the SHTL, JOG or VAR button is
	pressed.
101	For selecting the maximum speed of shuttle
	operations.
SHTL MAX	0000	k9.8: k9.8 times normal speed
	0001	k16: k16 times normal speed
	0002	k32:	k32 times normal speed
	<Note>
	Depending on the tape format, the actual tape running
	speed differs slightly from what is indicated by the
	superimposed display.
102	For setting the maximum speed of fast
	forward and rewind operations.
FF. REW MAX	0000	k16: k16 times normal speed
	0001	k32: k32 times normal speed
	0002	k50: k50 times normal speed
	0003	k60: k60 times normal speed
	0004	k100:	k100 times normal speed
	<Note>
	The maximum speed is automatically limited to 50x for
	the DVCPRO HD and DVCPRO50 format and to 32x for
	the DV and DVCAM formats.
104	For selecting		whether a warning is to be
	displayed when the REF VIDEO signal has not
REF ALARM	been connected.
	0000	OFF: A warning is not displayed.
	0001	ON: A warning is displayed by the
			blinking STOP lamp.
105*1	For selecting the VTR mode which is to be set
	to the EE mode when “0 (EE)” is selected as
AUTO EE SEL	the setup menu item No.140 (OUTPUT)
	setting.
	0000	S/F/R:
	The EE mode is established when the VTR is
	in the STOP, FF or REW mode.
	0001	STOP:
	The EE mode is established when the VTR is
	in the STOP mode only.

*1: This item is not displayed when the 23/24 Hz or 25 Hz (HD or SD) mode has been selected as the system menu item No.25 (SYSTEM FREQ) setting.

The underlining (__) denotes the factory setting mode.

No./Item			Description of setting
106	For selecting the video				and audio output
	statuses in the EJECT mode.
EJECT EE SEL	0000		EE:
	The EE mode is always established regardless of
	the setup menu item No.140 (OUTPUT) setting.
	0001	BLACK:
	When setup menu item No.140 (OUTPUT) is set to:
	“EE”:		The EE mode is established.
	“TAPE”:		The BLACK mode is established for
			the video signals, and the audio
			signals are muted.
	0002		GRAY:
	When setup menu item No.140 (OUTPUT) is set to:
	“EE”:		The EE mode is established.
	“TAPE”:		The GRAY mode is established for the
			video signals, and the audio signals
			are muted.
	<Note>
	If 0 (EE) is selected while the 23/24 Hz or 25 Hz (HD or
	SD) mode has been selected as the system menu item
	No.25 (SYSTEM FREQ) setting, the VTR construes that
	1 (BLACK) has been selected.
107*1	For selecting what signals are to be output
	when the EE mode is established.
EE MODE SEL	0000	NORMAL:
	Signals delayed by an amount equivalent to the time taken
	for the signals to be processed internally are output.
	0001		THRU:
	The signals are not processed internally but output in their
	original form with no delay.
	<Note>
	The internal operation forcibly sets “NORMAL” when an
	editing mode is selected or when SDTI is selected
	during video input signal selection.
108	For setting the play startup time in 1-frame
	increments.
PLAY DELAY	0000		0
	:		:
	0015		15
109*1	For selecting whether to engage playback framing
	lock in 4-field increments or in 2-field increments.
CAP. LOCK	<59/60Hz>			<50Hz>
	0000		2F	0000	2F
	0001		4F	0001	4F
				0002	8F
110	For selecting			whether	the tape is to be
	automatically wound back to its beginning
AUTO REW	when the tape-end has been detected.
	0000		OFF: The tape stops when it reaches the
				tape-end.
	0001		ON: The tape is rewound to its beginning.
111*1	For selecting whether to automatically stop the
	VTR when the counter value is at the “0” position
MEMORY	during CTL mode FF and REW operations.
STOP	0000		OFF: The VTR does not stop.
	0001		ON: The VTR is automatically stopped.
	<Notes>
	• Either the stop or still picture (SHTL STILL or VAR
	STILL) mode, whichever has been set using setup
	menu item No.307 (AFTER CUE-UP), is
	established when the VTR is stopped.
	• If both the AUTO REW function and MEMORY
	function have been selected at the same time, the
	AUTO REW operation takes priority.

84