Video | Panasonic HD1700pe specs

Setup menus

<VIDEO>

No./Item		Description of setting


600*1	For selecting the video signal which is to be input.
	0000	INT SG:
VIDEO IN SEL	The internal signal selected by the VIDEO INT
	SG item is generated.
	0001	HDSDI:
	The serial video signal which has been input to the
	HD SDI IN connector is selected.
	0002	SDTI: (In 59/60 Hz mode)
	The compressed IF signal which has been input to
	the SDTI IN connector is selected. (This setting
	does not appear when the AJ-YAC15P optional
	board has not been installed.)
	0002	SD SDI:
	The serial video signal which has been input to the
	SD SDI IN connector is selected. (This setting does
	not appear when the AJ-UC1700G optional board
	has not been installed.)

601*1	For selecting the type of internal signal.
	0000	100%CB:
VIDEO INT SG	A 100% color bar signal is selected.
	0001	75%CB:
	A 75% color bar signal is selected.
	0002	SMPTE:
	An SMPTE color bar signal is selected.
	0003	ARIB:
	An ARIB color bar signal is selected.
	0004	MB:
	A multiburst signal is selected.
	0005	RAMP:
	A ramp signal is selected.
	0006	BLACK:
	A black signal is selected.
	0007	PLL:
	A PLL signal is selected.
	0008	EQ:
	An EQ signal is selected.

602*1	For selecting how to process the serial input.
	0000	DR OFF: The 8 higher bits after rounding up
SDI IN MODE		the 2 lowest bits are recorded.
	0001	DR ON: The signal with 8 higher bits, obtained
		by dynamic rounding, is recorded.

603	For selecting whether to mute the video output
	signals if LOW RF has been detected during
V-MUTE SEL	playback.
	0000	N MUTE: The signals are not muted.
			(They are frozen.)
	0001	GRAY: The signals are muted with gray.
	0002	BLACK: The signals are muted with black.
	0003	NOISE: The signals are muted with noise.

604*1	For selecting		the freeze mode of the still
	pictures and slow playback mode.
FREEZE SEL	0000	FIELD: Field freeze, field slow
	0000	FRAME:	Frame freeze, frame slow

*1: This item is not displayed when the 23/24 Hz or 25 Hz (HD or SD) mode has been selected as the system menu item.

*4: This item is not displayed when the 23/24 Hz or 25 Hz (HD) mode has been selected as the system menu item No.25 (SYSTEM FREQ) setting.

*5: This item is not displayed when the 25 Hz (HD or SD) mode has been selected as the system menu item No.25 (SYSTEM FREQ) setting.

The underlining (__) denotes the factory setting mode.

No./Item		Description of setting


605*1	During field slow playback, vertical interpolation is
	conducted automatically to minimize the up/down
INTERPOLATE	movement of the playback pictures. However, this
	setting enables the interpolation operation to be
	forcibly set to OFF.
	0000	OFF:	The interpolation is forcibly set to OFF.
	0001	AUTO:	During slow playback, the interpolation
			is automatically set to ON.

606	For selecting the SD SDI or MONITOR output
	signal.
SD MONI O	0000	MONI: : The MONITOR signal is output.
SEL	0001	SDI:	The same video signal as the
			one output from the SD SDI
			OUT1 connector is output
	<Note>
	When 1 (SDI) is selected, the time code and other
	information are not superimposed on the display.

620*4	For selecting the picture frame during down-
	conversion.
DOWNCON	0000	FIT_V:	Side cut mode
MODE	0001	FIT_H:	Letter box mode
	0002	FIT_HV:	Squeeze mode
	0003	14:9:	Semi letter box 14:9
	0004	13:9:	Semi letter box 13:9

621*5	For selecting the picture frame during up-
	conversion.
UPCON MODE	0000	FIT_V:	Side panel mode
	0001	FIT_H:	Top and bottom cut in vertical
			direction
	0002	FIT_HV:	Stretch mode

622	For selecting the horizontal frequency band
	during down-conversion and line conversion
D/C RESP	(1080i <> 720p).
H	0000	WIDE
	0001	STD

623	For selecting		the vertical frequency band
	during down-conversion and line conversion
D/C RESP	(1080i <> 720p).
V	0000	WIDE
	0001	STD

624*5	For selecting the horizontal frequency band
	during up-conversion and line conversion.
U/C RESP	0000	STD
H	0001	NARROW

625*5	For selecting		the vertical frequency band
	during up-conversion and line conversion.
U/C RESP	0000	STD
V	0001	NARROW

626	For accentuating the horizontal contours
	during down-conversion and line conversion
D/C ENH	(1080i <> 720p).
H	0000	0dB
	0001	i0.7dB
	0002	i1dB	<Note>
	0003	i1. 2dB	<Note>
	0004	i1.5dB	The numbers on the superimposed
	0005	i2dB	display are approximations only.

93

Image 93

Panasonic HD1700pe manual Video

Contents

VQT0E88 Model AJ Operating precaution For your safety General For U.S.A. and Canada For your safetyFor Europe Do not Remove Panel Cover by UN- Screwing For U.K. only How to replace the fuse Contents General outline Standard accessories Features Front panel Parts and Their Functions Meter FULL/FINE selector button Monitor Select buttonsRemote buttons and RS-232C display Auto OFF lamp Time code display Adjust dial? Unity lamps Video Unity lamp Audio Unity lamp Switching between REC or PB Switching between Unity or VARHREV, Still and FWD lamps Shtl button Audio channel selector button When the search mode is established on the CUE screenNumber keys PREVIEW/REVIEW button Front panel Standby button Player and Recorder buttonsInput Check button Video 59/60 Hz mode Input Check output specificationsVideo 50 Hz mode Audio Time code display 59/60 Hz mode only Drop frame marks Variable memory mode indicatorTime counter display Field marks Rear panel @ SD REF in connectors and 75-ohm termination switches SD Serial Digital Component Audio and Video OUT connectorsHD REF in connectors and 75-ohm termination switches HD REF OUT connector Example of connections performed for one VTR ConnectionsPlayer side Source side Example of system connections in 25 Hz SD mode Example of system connections in 23/24 Hz or 25 Hz HD mode Example of connections with an editing controller Consumer-use DV and Dvcam cassettes Concerning tapesCassettes XL cassettes Turning on the power and inserting the cassette Precautions for Still Timer settingStop and Standby modes Selecting the video and audio input signals Adjust the audio levelsRecording Playback Playback phase adjustment function Shuttle mode Jog modeVariable mode Jog/Shuttle Preroll Manual EditingAssem Insert When using this VTR as the recorder Switch settings and adjustmentsWhen using this VTR as the player Set the Power switch to on Player Selecting the editing modeRecorder Assem screen When no edit points have been set When only one edit point has been setChecking the edit points Re-registering an edit point Postrolling PreviewingRetry function Auto tag function Reviewing Registering the edit points Audio Split EditingModifying the edit points Clearing the edit points Between the video in and OUT points Duration displayBetween the audio in and OUT points Match frame processing function Variable memory function Variable memory function selectionOutline Variable memory editing operation procedure General description Function menusGeneral menus Special menus Allocating the function keys Toggle How to switch the settingsToggle i ADJ Press Status display Home INT24 INT23INT25 INT50 59.94 Hz/60 Hz, 50 Hz mode 59.94 Hz/60 Hz operation specifications for tape playback23.98/24Hz, 25 Hz HD mode Hz SD mode Variable memory mode indicator Operation mode speed displayHome Status display Remaining tape/total tape display Selecting the values Entering the input values Registering TCG valuesInputting numbers and letters ENT Tape ResetOutput TC/CTL*2 Video F1 Shift F2 Shift F3 Shift SUP LV ADJ Setup LVLLevel HUE ADJ Audio Audio signal input selection CH5-CH8 F1 SHIFT2 VolumeF2 SHIFT2 F3 SHIFT2 Reccue CH1 REC CUE CH2 CH3 CH4 CH5 CH6 CH7 CH8 RUN MD Free RUN Mode TCG MD PRE TCG Mode AutoDF MOD NDF DF Mode F1 Shift Timer CUE When registering cue points by number Search modeCue point registration Search operations Clearing registered points$ Clearing all the registered points together $Clearing individual registered points Diag Error log functionHour-meter display LCD monitor displays Messages saved when on is selected as the setting Menu Automatic editing and manual editing Assemble Marker InsertEditing channels With the exception of the function button F1, two channels Settings Setup MENU/SYSTEM Menu Setup Menu function buttons Flow of setting changesSystem Menu function buttons Selecting the memory target Press the Shift button FileSelecting the operation file in the selected memory Transferring files between memories Load USER1 On Load USER2 USER3 USER4 File overwrite inhibit facilityLoad Save PF1/PF2 Clearing all the function button settingsRegistration Clearing the menu items PF1/PF2 function buttons Flow of function button registration PF1/PF2 function button names Name of setup menu Still Timer CH1 in LV A1 ILV File status Card Selecting the operation files inside the selected memory Selecting the targeted memory Press the Shift buttonVTR Memory IC Card Memory IC Card Memory VTR Memory Unlocking a file Locking a fileFormat Delete Items which can be registered in the input and output pins Pins in which functions can be registered50P IN/OUT Assign Registered item names Clearing Resetting all the items and values Special OUT menu list TC input statuses Error statusesUp-conversion statuses Up-conversion down-conversion statuses 50P IN/OUT Assign function buttons Flow of registration Pin assignment factory settings System menus Video output signal adjustments HD*UP SYS HCoarse Fine SCH SD*DW AV PhaseFreq Menu Lock Basic Setup menus Basic HD-LP PB FormatHD-SP Frequency Operation Operation Alarm Beep SP ModeEject Lamp KEY Beep Interface Edit Edit Tape Protect Time Code Time Code Video Video ENH HHD SDI OUT SD SDI OUT Video OUT C Resp H U/CC Resp STD Narrow LVL SD*DW PhaseHUE Bright ESR Mode VO SetupCCR Mode BLK Clip Audio Audio REC CH7 REC CH6REC CH8 PB Fade CH3 CUE SEL CH2 CUE SELCH4 CUE SEL CH5 CUE SEL ANA CH1 SEL Audio PB VRANA CH2 SEL ANA CH3 SEL Audio outputs in the search mode Connections with Dolby-E* components MenuOn Load Memory Memory C How to switch the system frequency No.2525 HD Menu management accompanying switching the system frequency Setup menusSystem menu DET Adjust REC AdjustEE Mode SEL Normal Thru SP Mode INH OFF RUN Mode REC Free TCG Mode PRE AutoRegen Mode Assem Insrt INT DF Mode NDF VO Setup HD ADD21 U/C Mode Fith FithvVO Setup SD ADD21 Resp STD Narrow 110 Time code and user’s bit Setting the internal time codeTime code User’s bit Concerning the time code and user’s bit Setting the external time codeCue time registration, preroll and cue-up Time code and user’s bit playback Superimpose screen Operation modeDisplay position Characters displayed Selecting the audio recording channels and monitor output Audio recording channelsMonitor output channels Display saving function Rack-mounting adapters Rack mountingEIA standard rack Inner member 18-inch rail Inner member 22-inch rail Video head cleaning MaintenanceCondensation Diag menu Error messagesDisplaying the Diag menu Displaying the warning information Displaying the hour-meter information Error messages Reel DIR MotorUnmatch Reel Condition for acknowledging Commands from RS-232C interface Hardware specificationsExternal interface specifications RS-232C interface Send format Controller PC VTR Software specifications protocol When the communication has ended successfully Error code tableWhen the communication has ended unsuccessfully Send command Commands relating to operation control Command table CTL/TC Data Commands relating to inquiriesRequest Status CLS Microsoft QuickBASIC sample program Video OUT Connector signalsAudio OUT RS-422A Remote 9P Printed circuit boards Parallel Remote 50PEncoder REMOTE15P Video Input Connectors SpecificationsVideo Output Connectors General Audio Input Connectors Video signal adjustment rangesAudio output Connectors Audio level adjustment range Optional Accessories Other INPUT/OUTPUT Signals 133 Panasonic Broadcast Europe GmbH Panasonic Broadcast Europe