Pump head of greater than 1m | Electrolux LAVAMAT W 1050 instruction

Installation and connection instructions

If you intend the drain hose from the washing machine to empty into a sink, make sure that the sink is empty and the plug hose is not blocked. Use the plastic “U-Piece“ supplied.

Important! The end of the drainage hose must not be submerged in the pumped-out water. Otherwise, the water could be sucked back into the ap- pliance.

Pump head of greater than 1m

Every washing machine includes a wash water pump for the removal of wash and rinse water, which can pump fluids through the outlet hose up to a height of 1m, measured from the surface on which the machine stands.

For pump heads of greater than 1m please contact your local AEG Service Force Centre.

46

Image 46

Electrolux LAVAMAT W 1050 manual Pump head of greater than 1m

Contents

Lavamat W 1050 Electronic Future owners Dear CustomerPages of this instruction book Appliance Contents Trouble Shooting What to do ifPage Prior to initial start-up SafetyIntended Use Child Safety General Safety Environmental tips When disposing of the washing machineDisposal Packaging Front view Description of the ApplianceDrawer for Detergent and Conditioners Control Panel Programme selector Programme Option Buttons WOOL/SILK P Handwash Shortened wash programme for lightly soiled washing Consumption Values and Programme TimesLoad Water Energy Time Preparing a Wash Load Before the First WashSorting and preparing a wash load Types of Washing and Care Symbols Water softening Quantities of detergent and conditioners?Water hardness details Brief instructions Running a washing cycleAfter the washing programme has ended Loading the washing Door indicator START/PAUSE indicatorOpening and closing the door Start the wash programme again Detergents and conditioners If using liquid detergents/tabletsAdding detergent/conditioners Compartment for main wash powder detergents For the appropriate pro Setting the washing programmeChanging Spin Speed/selecting Rinse Hold Justed to suit the washing programme Programme Progress Starting the Wash ProgrammeChanging the washing programme Washing cycle complete/removing the washing Changing the Spin Speed Programme Tables Washing Separate Spinning Separate RinsingType of washing Maintenance and Cleaning Detergent Dispenser Drawer Washing Machine Drum Maintenance WashTo run a maintenance wash Main door Cleaning the drain pump Before cleaning the drain pump Operating Instructions Problem Possible cause Remedy Trouble ShootingWhat to do if Moved START/PAUSE Water tap is not fully Open the water tap fully If after the last rinse foam is still visible If the washing results are not satisfactoryIf there are still grey stains on the washing If there are white residues on the washing Carrying out an emergency emptying Have a flat container on hand to catch the water Additional rinse cycles RINSE+ When the water is completely drainedTo cancel the additional rinse cycles To set the additional rinse cycles Washing programme can be Child Safety FeatureCancelling the child safety feature Started Installation and connection instructions Installation Safety Precautions Transporting the appliance Installation of the applianceRemove transport packaging Are supplied with it Cover the hole with the cap C Installation-Site preparation Installation on a Suspended Floor Check that the appliance is level using a spirit level Levelling the Appliance Earth Blue Neutral Brown Live Electrical ConnectionMeasures not be observed Disposed of safely Permanent Connection Water connection Water pressure Inlet Hose Connection Water Drainage Pump head of greater than 1m Dimensions Technical dataDimensions in mm European Guarantee Guarantee ConditionsGreat Britain Page Index PNC Service & Spare Parts0870 5 929 Help us to help you Customer Care AEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG