Electrolux LAVATHERM 57810 1, 3

1.Open loading door

1Warning! Laundry and drumcan become hot. Risk of burns!

2.Load or remove laundry items.

3.Close the door securely. Lock must audibly lock.

4.Press the START/PAUSE button to continue the drying cycle.

Once the drying cycle is complete, the END and CREASE GUARD dis-

plays light up. If the AUDIBLE SIGNAL button has been pressed, an au-

dible signal sounds intermittently.

3The drying cycle is automatically followed by a crease guard phase

which lasts around 30 minutes. The drum rotates in intervals during

this phase. The laundry thereby remains relaxed and free of creases. The

laundry can be removed at any time during the crease guard phase.

(The laundry should be taken out towards the end of the crease guard

phase at the latest to prevent creases from forming.)

1.Open loading door

2.Before removing the laundry, remove lint from the micro-fine filter. It is

best to use a damp hand for this purpose (refer to “Cleaning and main-

tenance” section).

3.Remove laundry.

4.Turn the programme selector to OFF.

Important! After each drying cycle

–clean the micro-fine filter and fine strainer,

–drain the condensate tank

(refer to the “Cleaning and maintenance” section).

5.Close loading door.