Electrolux LAVATHERM 57810 manual Programme Time

Problem	Possible cause	Remedy
		Select a different programme
	Wrong programme selected.	the next time you dry (see
		“Overview of programmes”
		section).
	Lint filter clogged.	Clean lint filter.
	Heat exchanger clogged	Clean heat exchanger.
	with lint.
Drying results unsatis-	Overloading of laundry.	Observe recommended load-
		ing volumes.
factory.
	Ventilation slots in base area	Uncover ventilation slots in
	covered up.	base area.
	Residue on inside surface of	Clean inside surface of drum
	drum or drum ribs.	and drum ribs.
		Make an adjustment using the
		INTENSITY function (see chap-
		ter ”Drying, Selecting addi-
		tional functions”).
Loading door does not	Mains plug disconnected.	Plug in at mains socket.
		Set programme. Loading door
open with DOOR but-	Programme selector in OFF
ton.		can be opened at any time by
	position.
		exerting pressure on the door.
Loading door does not	Fine strainer not in place	Install fine strainer and/or
	and/or large mesh filter not	snap large mesh filter into
close.
	locked in place.	place.
When a button is	Washing protection. After	Turn the programme knob to
	the start of the programme,
pressed, Err appears
	the option can no longer be	OFF. Set the programme again.
in the multi-display.
	set.
	Programme selector in OFF	Turn programme selector to
Drum light does not	position.	LIGHT or to any programme.
work.	Defective light bulb.	Replace light bulb (see next
		section).
PROGRAMME TIME	Programme time is correct-
display changes errati-	ed automatically depending	Automatic process; this is not
cally or stays un-	on type and volume of	a machine fault.
changed for a long	laundry and level of damp-
time.	ness.
Programme inactive,	Condensate tank is full.	Empty condensate tank, then
EMPTY WATER display		start programme with START/
illuminated.		PAUSE button.

21