Electrolux LAVATHERM 57810 Special accessories, Installation kit for external condensate drain

12.Change door lock F over to the opposite side, insert the cable connector and screw down the door interlock.

13.On the other side, insert the cable connector in cover G, insert cover and allow snap-in button to lock into place.

14.Insert door and hinges into recesses on the front of the machine and screw down.

15.Once the door has been reversed, check the function of the DOOR but- ton.

Note regarding contact protection: The machine is only secure for operations again once all plastic parts have been inserted.

Special accessories

The following special accessories are available from your Service Force Centre or your specialist dealer:

Intermediate installation kits for stacked washer and dryer:

These intermediate installation kits can be used to arrange the dryer and an automatic AEG-Electrolux washing machine (60cm wide, front loading) as a space-saving washer/dryer stack. The automatic washing machine is at the bottom and the dryer is at the top.

Two versions can be supplied:

– without stacker plate	916 019 102
– with extractable stacker plate	916 019 103

Installation kit for external condensate drain

Installation kit (125 122 510) for direct draining of condensate into a basin, siphon, gully, etc. The condensate tank then no longer has to be drained, it must however remain in its intended position in the ma- chine. Refer to the “Programme options” section for how to deactivate the EMPTY WATER display.

Max. displacement height: 1m from the base of the dryer; max. dis-

placement length: 3m

29