28What to do if ...
What to do if ...
Troubleshooting by yourself
If, during operation, the error code E... plus number or letter) appears on the LCD: Switch the machine off and on again. Reset programme. Press the START PAUSE button. If the error is still displayed, please inform your local Service Force Centre and quote the error code.
Problem | Possible cause | Remedy |
|
| Plug in at mains socket. Check |
| Mains plug is not plugged in or | |
| fuse in fuse box (domestic in- | |
| fuse is not working correctly. | |
| stallation). | |
|
| |
Dryer does not work. | Loading door is open. | Close loading door. |
| ||
| Have you pressed the START | Press the START PAUSE button |
| PAUSE button? | again. |
|
| Select a different programme |
|
| |
| Wrong programme selected. | the next time you dry (see “Pro- |
|
| gramme chart” chapter). |
| Lint filters clogged. | Clean lint filters. |
| Fluff filter clogged. | Clean fluff filter. |
|
|
|
| Heat exchanger clogged with | Clean heat exchanger. |
| lint. | |
|
| |
| Overloading of laundry. | Observe recommended loading |
| volumes. | |
|
| |
Drying results unsatisfactory. | Ventilation slots in base area | Uncover ventilation slots in |
| covered up. | base area. |
|
| Clean inside surface of drum |
| Residue on inside surface of | and drum ribs. |
| Make an adjustment using the | |
| drum or drum ribs. | |
| DRYNESS function (see chap- | |
|
| |
|
| ter ”Daily use”) |
|
|
|
Conductance of water at in- stallation site differs from standard setting of machine.
