30What to do if ...
WARNING!
Do not use standard bulbs! These develop too much heat and may damage the machine!
Before replacing the bulb, disconnect the mains plug; with a permanent connec- tion: fully unscrew or deactivate the fuse.
1.Unscrew cover above the bulb (this can be found directly behind the loading aperture, at the top; refer to “Description of machine” section.)
2.Replace defective bulb.
3.Screw cover back down.
Check the correct positioning of
WARNING!
For safety reasons, the cover must be screwed down tightly. If this is not done, the dryer must not be operated.
