2.The evaporator is frosted up.
3.The temperature control setting is incorrect.
4.The gas pressure is incorrect - check the pressure regu- lator at the gas container.
5.The ambient temperature is too high.
6.To much food is loaded at one time.
7 . The door is not properly closed or the magnetic sealing strip is defective.
8.More than one source of energy is used at the same time. If the refrigerator still does not work properly, call a service technician.
The sealed cooling system must not be opened, since
it is under high pressure.
MAINTENANCE
Concerning gas- and electric installations, only authorized experts are allowed to carry out maintenance and repair works. Besides, it is recommendable to contact an authori- zed service if it comes to repair works.
According to the valid regulations G607 of DVGW, the gas installation as well as the connect flue oulets are to be checked every two years by an expert (this has to be arranged by the person responsible).
SOME USEFUL HINTS
Make sure that:
●The refrigerator is not operating on 12 V when the ve- hicle is parked, otherwise you will drain the car
●Defrosting is carried out periodically.
●The refrigerator is left with the door(s) ajar when it is not to be used for some time.
●Liquids or items with a strong odour are well
●The ventilation openings are unobstructed.
●The door is secured by means of the travel catch when the caravan is on the move.
●Only one mode of operation at a time is used to run the refrigerator.
GUARANTEE AND SERVICE
The refrigerator is guaranteed for one full year on condition that it is used in a correct manner and in accordance with these operating and installation instructions.
It is also embraced by a European guarantee as described in the brochure supplied with the refrigerator.
Service and spare sparts are obtainable from your dealer or Electrolux - consult the telephone directory
TECHNICAL DATA | RM 4280/ 81 |
Overall dimensions, refrigerator
Height . . . . . . . . . . . . . . . . . . . . . . . .821 mm Width . . . . . . . . . . . . . . . . . . . . . . . .486 mm Depth (incl. cooling unit)
without door. . . . . . . . . . . . .435 mm with door. . . . . . . . . . . . . . . .474 mm
Height . . . . . . . . . . . . . . . . . . . . . . . .825 mm Width . . . . . . . . . . . . . . . . . . . . . . . .490 mm Depth . . . . . . . . . . . . . . . . . . . . . . . .460 mm
Capacity |
|
|
gross | 81 | lit. |
net | 77 | lit. |
frozen food compt | . 5 | lit. |
Weight (without packaging) | 23 | kg |
Electrical data
Input 230 V . . . . . . . . . . . . . . . . . . . . . 125 watt 12 V . . . . . . . . . . . . . . . . . . . . . 120 watt Energy consumption /24 h. . . . . . . . .2,5 kWh
LP gas data |
|
Input | 232 watt |
ditto, low flame | 116 watt |
Energy consumption /24 h | 0,27 kg |
Cooling medium Ammonia (R 717) |
|
INSTALLATION INSTRUCTIONS
REPOSITIONING THE HINGES
The door hinges can be moved to the opposite side in the following way:
●Unscrew the upper hinge pin, taking care not to lose the set of washers and bushes.
●Lift the door from the lower hinge pin.
●Unscrew the pin and mount it on the opposite side hinge.
●Unscrew the travel catch and mount it on the opposite side.
●On the upper edge of the door are two plastic inserts for the alternative holes of the travel catch. Pry out carefully and exchange
●Fit the door on the pin and reassemble the pin with washers and bushes in its new place.
●Check that the door closes properly and seals all round.
DOOR PANEL
The door panel can easily be mounted or changed. The dimensions of the panel must be:
Height | 740 mm |
Width | 453,5 mm |
Thickness | max 3,8 mm |
●Remove the door, see REPOSITIONING THE HINGES.
●Remove the lower trim moulding and then withdraw the panel by sliding it downwards.
●Fit new panel in place and slide it up as far as possible.
●Fit the trim moulding back in place.
10
