How To Assemble
CAUTION: Assemble the cleaner completely before plugging into an electrical outlet.
CAUTION: Moving parts, stay clear of brush roll when plugging in. Make sure brush roll is clear of moving parts when plugging in.
NOTE: Features may vary by model yet all parts assemble the same.
Step A Unpack Body of Vacuum | Step B Attach Handle |
and Handle |
|
Handle
Release
Button
Handle
Tabs
Handle
1.Remove vacuum body and handle from carton. Locate the handle release button on body and the handle tabs on handle.
2.Position handle above vacuum body. Line up the handle tabs to the notches in the opening at the top of the vacuum body.
3.Press down on the handle release button as shown above. Slide the handle down into the unit, until it clicks into place.
3
