How To Maintain
The instructions in this booklet serve as a guide to routine maintenance. To keep the cleaner operating at top effi ciency empty the dust cup and clean the fi lter after each use.
Empty Dust Cup
CAUTION: Turn off the switch and unplug the electrical cord before servicing.
1.Remove hand vac from the base unit. 2. Push in on dust cup latch and pull dust cup from handle section.
Dust
Cup
Latch
3.Remove dust cup fi lter from dust cup. Shake and brush the dust and dirt from fi lter.
4.Shake contents of dust cup into a waste container.
5.Replace dry dust cup filter in dust cup and reassemble following above directions in reverse.
NOTE: Replace a dirty or torn filter.
6.Dust cup may be cleaned with warm water and mild detergent. Wipe dry, do not put dust cup in dishwasher.
Cleaning and Replacing Dust Cup Filter, PN 62406
Pull fi lter off of fi lter frame.
Shake and brush the dust and dirt from fi lter. If desired, launder fi lter by hand in warm water using a mild detergent.
NOTE: Air dry thoroughly before returning to use.
To put fi lter on fi lter frame, pull and stretch the elastic edge of fi lter up and over the rim on the fi lter frame.
Filter
Frame
Rim 
Elastic
Edge
Correct Installation
NOTE: If filter is not properly installed, dirt and dust will go past the filter and this can damage the cleaner motor.
Clean Brush Roll
The brush roll turns to sweep and comb the carpet nap. Keep the brush roll free from hair and threads so it will continue cleaning.
6
