Malfunction |
| Possible Cause |
| Remedy |
|
|
|
|
|
Unusual noises.
The compressor does not start immediately after changing the temperature setting.
Water on the floor or on sto- rage shelves.
Appliance is not level.
The appliance is touching the wall or other objects.
This is normal, no error has occurred.
Water drain hole is blocked.
Readjust the feet.
Move the appliance slightly.
The compressor starts after a period of time.
See the "Cleaning and Care" section.
Changing the light bulb
Warning! There is a risk of electric shocks! Before changing the light bulb, switch off the appliance and unplug it, or pull the fuse or the circuit breaker.
Light bulb data: 220-240 V
1.To switch off the appliance, turn the temperature regulator to position "0".
2. Unplug the mains plug.
3. To change the light bulb press on the rear hook and at the same time slide the cover in the direction indicated by the arrow.
4.Change the defective light bulb with one of the some power (the maxi- mum power is shown on the light diffuser).
5.Replace the light cover by sliding it into its original position.
6.Put the refrigerator back into opera- tion.
20
