FROSTMATIC

The FROSTMATIC function accelerates the freezing of fresh food and, at the same time, protects foodstuffs already stored from undesirable warming.

1.The FROSTMATIC function is switched on by pressing the FROSTMATIC but- ton. The yellow light illuminates.

If the FROSTMATIC function is not ended manually, the appliance switch off the FROSTMATIC function after 48 hours. The yellow light goes out.

2.The FROSTMATIC function can be ended manually at any time by pressing the FROSTMATIC button again. The yellow light goes out.

Alarm reset button

In the event of an abnormal temperature rise inside the freezer (e.g. power cut) warning light (N) will start to flash and a buzzer will sound.

After the temperature has returned to normal, the warning light (N) will continue to flash, although the buzzer has stopped.

When the alarm button is pressed, the warmest temperature reached in the compartment flashes on the indicator.

Switching the Appliance off

To switch off, hold down the ON/OFF button for approx. 5 seconds. This will result in a countdown from "3" to "1" taking place in the temperature display. On reaching "1" the fridge will switch off. The temperature display will go off.

Note:

The appliance cannot be switched on or off if unplugged, or if there is no power being supplied to it. Following connection to the mains power sup- ply, the appliance returns to the same operating state as before the inter- ruption of main power.

If the appliance is not going to be used for an extended period:

1.Switch off the appliance, holding down the ON/OFF button until the display goes off (see above).

2.Remove the mains plug or switch off or turn out the circuit breaker or fuse.

3.Defrost the freezer compartment and clean the appliance thoroughly (see section: “Cleaning and Maintenance”).

4.Finally, leave the doors open so as to avoid a build up of odours.

13

Page 13
Image 13
Electrolux SANTO 70312 manual Alarm reset button, Switching the Appliance off