Electrolux SANTO U 86040 i What to do if, Symptom, Possible Cause, Remedy

Models: SANTO U 86040 i

1 32
Download 32 pages 60.23 Kb
Page 27
Image 27
What to do if ...

What to do if ...

Symptom

 

Possible Cause

 

Remedy

 

 

 

 

 

The compressor runs con- tinuously.

The food is too warm.

Interior lighting does not work.

Heavy build up of frost, possibly also on the door seal.

Temperature is set too cold.

Temperature is not proper- ly adjusted.

Door was open for an extended period.

A large quantity of warm food was placed in the appliance within the last 24 hours.

The appliance is near a heat source.

Light bulb is defective.

Door seal is not airtight (possibly after reversing the door).

Turn the thermostat knob to a warmer setting tem- porarily.

Please look in the “Initial Start Up” section.

Do not leave the door open any longer than necessary.

Turn the thermostat knob to a colder setting tem- porarily.

Please look in the “Installation location” section.

Please look in the “Changing the Light Bulb” section.

Carefully warm the leaking sections of the door seal with a hair dryer (on a cool setting). At the same time shape the warmed door seal by hand such that it sits correctly.

The compressor does not

 

 

 

 

start immediately after

 

This is normal, no error has

 

The compressor starts after

changing the temperature

 

occurred.

 

a period of time.

setting.

 

 

 

 

 

 

 

 

 

Water in the bottom of

 

Water drain hole is

See the “Cleaning and

the cabinet.

 

blocked.

 

Care” section.

 

 

 

 

 

27

Page 27
Image 27
Electrolux SANTO U 86040 i installation instructions What to do if, Symptom, Possible Cause, Remedy