| Installation | |
Warning! After completion | 10 | |
of the door reversing opera- | ||
| ||
tion, check that the door | 13 | |
gasket adheres to the cabi- | ||
net. If the ambient temper- |
| |
ature is cold (i.e. in Winter), |
| |
the gasket may not fit per- |
| |
fectly to the cabinet. In that | 9 | |
case, wait for the natural | ||
| ||
fitting of the gasket or | 12 | |
accelerate this process by | ||
heating up the part involved |
| |
with a normal hairdryer on | 11 | |
a low setting. | ||
3 | ||
|
Changing over the freezer compartment door
☞1. Open the freezer compartment door a little way.
2.Using a small screwdriver, press the spring in the opening of the lower door bearing
slightly upwards and take the door bearing out complete with the door.
3. Position the covering cap (M) on the opposite side.
4. Turn the freezer compartment door through 180° and fit the lower door bearing into the lower bearing cavity of the freezer compartment door.
5. Lift the freezer compartment door a |
|
little way upwards, fit it into the upper | M |
door bearing, and at the same time |
|
insert the lower door bearing into the | AEG43 |
square hole. Small upwards and downwards adjustments of the freezer compartment door will make fitting easier.
9
