Electrolux SIG 233 manual Oven Bulb Replacement, Burners, To replace the faulty bulb

Models: SIG 233

1 28
Download 28 pages 1.46 Kb
Page 13
Image 13
Burners

Hob

After every use wipe with a soft cloth well wrung out in warm water to which a little washing up liquid has been added, avoiding any leakage through the holes of the hob. Rinse and dry with a soft cloth.

To remove more stubborn stains, wet and leave to dissolve, do not scratch and avoid the use of abrasive or caustic products that could damage the enamel.

Burners

The burner caps and crowns can be removed for cleaning. Wash the burners caps and crowns using hot soapy water, and remove marks with a mild paste cleaner. A well-moistened soap impregnated steel wool pad can be used with caution, if the marks are particularly difficult to remove.

After cleaning, be sure to wipe dry with a soft cloth.

Burner cap

Burner

ring

Ignition

OVEN BULB REPLACEMENT

OVEN BULB REPLACEMENT Ensure that the appliance is switched off and disconnected from the electricity supply before replacing the bulb to avoid possibility of an electric shock.

If the oven bulb needs replacing, it must comply with the following specifications:

Wattage:

25W

Voltage:

230/240V(50Hz)

Temperatures:

300ºC

Thread Type:

E14

 To replace the faulty bulb. To replace the faulty bulb.

1.Turn the glass cover anticlockwise and remove.

2.Remove the faulty bulb by turning it anti- clockwise and replace with a new one.

3.Refit the glass cover.

Reconnect the appliance to the electricity supply.

13

Page 13
Image 13
Electrolux SIG 233 manual Oven Bulb Replacement, Burners, To replace the faulty bulb